Promotions

Overview

This API lets you specify possible discounts. Of the promotions specified, Google applies the eligible promotion or set of promotions that leads to the lowest price. If you are looking for an API which supports arbitrary rate adjustments that can either increase or decrease the price when conditions are satisfied, then consider our Rate Modifications API. Note that if both APIs are present, rate modifications are applied before promotions.

Requests

Syntax

The Promotions message uses the following syntax:

<?xml version="1.0" encoding="UTF-8"?>
<Promotions partner= "partner_key"
            id="message_ID"
            timestamp="timestamp">
  <HotelPromotions hotel_id="HotelID" action="[overlay]">
    <Promotion id="PromotionID" action="[delete]">
      <BookingDates>
        <DateRange start="YYYY-MM-DD[THH:mm:ss]" end="YYYY-MM-DD[THH:mm:ss]"
          days_of_week="MTWHFSU_or_subset"/>
        <DateRange start="YYYY-MM-DD[THH:mm:ss]" end="YYYY-MM-DD[THH:mm:ss]"
          days_of_week="MTWHFSU_or_subset"/>
      </BookingDates>
      <BookingWindow min="integer_or_duration" max="integer_or_duration"/>
      <Ceiling amount_per_night="float"/>
      <Floor amount_per_night="float"/>
      <CheckinDates>
        <DateRange start="[YYYY-]MM-DD" end="[YYYY-]MM-DD" days_of_week="MTWHFSU_or_subset"/>
      </CheckinDates>
      <CheckoutDates>
        <DateRange start="[YYYY-]MM-DD" end="[YYYY-]MM-DD" days_of_week="MTWHFSU_or_subset"/>
      </CheckoutDates>
      <!-- Specify only one of percentage, fixed_amount, fixed_amount_per_night,
           fixed_price, or fixed_price_per_night; applied_nights is only used
           with percentage, fixed_amount_per_night, and fixed_price_per_night. -->
      <Discount percentage="float" fixed_amount="float" fixed_amount_per_night="float"
                fixed_price="float" fixed_price_per_night="float"
                applied_nights="integer_1_to_99" rank="integer_1_to_99">
        <!-- FreeNights may not be used in conjunction with attributes on Discount -->
        <FreeNights stay_nights="integer" discount_nights="integer"
                    discount_percentage="float" night_selection="[cheapest|last]"
                    repeats="boolean"/>
      </Discount>
      <!-- Exactly one of Discount or BestDailyDiscount must be specified.
           Specify only one of percentage, fixed_amount, or fixed_price. -->
      <BestDailyDiscount percentage="float" fixed_amount="float" fixed_price="float"/>
      <Devices>
        <Device type="[desktop|tablet|mobile]"/>
      </Devices>
      <InventoryCount min="integer" max="integer"/>
      <LengthOfStay min="integer" max="integer"/>
      <MembershipRateRule id="RateRuleID"/>
      <MinimumAmount before_discount="integer"/>
      <Occupancy min="integer" max="integer"/>
      <RatePlans>
        <RatePlan id="PackageID_1"/>
        <RatePlan id="PackageID_2"/>
      </RatePlans>
      <RoomTypes>
        <RoomType id="RoomID_1"/>
        <RoomType id="RoomID_2"/>
      </RoomTypes>
      <Stacking type="[any|base|none|second]"/>
      <StayDates application="[all|any|overlap]">
        <DateRange start="[YYYY-]MM-DD" end="[YYYY-]MM-DD" days_of_week="MTWHFSU_or_subset"/>
      </StayDates>
      <UserCountries type="[include|exclude]">
        <Country code="country_code"/>
      </UserCountries>
    </Promotion>
  </HotelPromotions>
</Promotions>

Elements and Attributes

The Promotions message has the following elements and attributes:

Element / @Attribute	Occurrences	Type	Description
Promotions	1	Complex element	The root element of a promotions message.
Promotions / @partner	1	string	The partner account for this message. This string value is the "Partner key" value listed on the Account settings page in Hotel Center. If you have a backend that provides feeds for multiple accounts, this value needs to match the ID attribute value specified in the <RequestorID> element of your <OTA_HotelRateAmountNotifRQ> and <OTA_HotelAvailNotifRQ> messages for the same account.
Promotions / @id	1	string	A unique identifier for this request message. This value is returned in the response message. Allowed characters are a-z, A-Z, 0-9, _ (underscore), and - (dash).
Promotions / @timestamp	1	DateTime	The creation date and time of this message.
Promotions / HotelPromotions	0..n	HotelPromotions	Promotions for a property. Each promotion applies to a single property. Unless <Stacking> is used, the promotion with the biggest discount is applied to the booking when multiple promotions are eligible.
Promotions / HotelPromotions / @hotel_id	1	string	The unique identifier for the property. This value must match the Hotel ID specified using <id> in the <listing> element in the Hotel List Feed. The Hotel ID is also listed in Hotel Center.
Promotions / HotelPromotions / @action	0..1	enum	If specified, the value must be "overlay". When the value is "overlay", all stored promotions are deleted prior to storing the promotions specified in the current message. If not specified, then each promotion specified in the current message is either: Added (if none of the stored promotions has the same id) Updated (if a stored promotion has the same id) Deleted (if a stored promotion has the same id and the value of the action attribute for the promotion specified in the current message is "delete")
Promotions / HotelPromotions / Promotion	0..99	Promotion	A single promotion for a property. Note that if action="overlay" and a <Promotion> is not specified, all promotions for the property are deleted. If you need to use more than 99 promotions, contact your Technical Account Manager (TAM).
Promotions / HotelPromotions / Promotion / @id	1	string	A unique identifier for the promotion. The maximum number of characters allowed is 40. Allowed characters are a-z, A-Z, 0-9, _ (underscore), - (dash), and . (period).
Promotions /HotelPromotions / Promotion / @action	0..1	enum	If specified, the value must be delete. If not specified and a promotion with the same id isn't stored, then this promotion is stored. Otherwise, if not specified and a promotion with the same id is stored, then the existing promotion is updated. If delete is specified, the stored promotion with the same id is deleted. When using delete, don't include any child elements in <Promotion>. Also, delete is not allowed in conjunction with <HotelPromotions action="overlay"/>.
Promotions / HotelPromotions / Promotion / BookingDates	0..1	BookingDates	A container for one or more ranges that define when booking must occur in order for the promotion to be applied.
Promotions / HotelPromotions / Promotion / BookingDates / DateRange	1..99	DateRange	A range specifying when booking must occur for the promotion to be applied.
Promotions / HotelPromotions / Promotion / BookingDates / DateRange / @start	0..1	Date or DateTime	The starting date or datetime (based on the property's time zone), inclusive, of the range. The date or datetime specified by start must be earlier than (or the same as) the date or datetime specified by end. If start isn't specified, the range is effectively unlimited in terms of a start time. If start is populated as date "YYYY-MM-DD", it is interpreted as datetime "YYYY-MM-DDT00:00:00".
Promotions / HotelPromotions / Promotion / BookingDates / DateRange / @end	0..1	Date or DateTime	The ending date or datetime (based on the property's time zone), inclusive, of the range. The date or datetime specified by end must be later than (or the same as) the date or datetime specified by start. If end isn't specified, the range is effectively unlimited in terms of an end time. If end is provided as date "YYYY-MM-DD", it is interpreted as datetime "YYYY-MM-DDT23:59:59".
Promotions / HotelPromotions / Promotion / BookingDates / DateRange / @days_of_week	0..1	string	The days of the week that are allowed in the date range. If not specified, all days are allowed in the date range. Each character in the string specifies a day. For example, "MTWHF" specifies that weekdays are allowed in the date range. Valid characters are: M for Monday T for Tuesday W for Wednesday H for Thursday F for Friday S for Saturday U for Sunday Any character combination is valid.
Promotions / HotelPromotions / Promotion / BookingWindow	0..1	BookingWindow	Specifies the time period when booking must occur relative to the check-in date (based on the property's time zone). For example, the booking window can be set to least 7 days, but not more than 180 days, prior to check-in.
Promotions / HotelPromotions / Promotion / BookingWindow / @min	0..1	integer or duration	The minimum duration prior to check-in when booking must occur for the promotion to be applied. If this isn't specified, or its value is 0, there is no minimum. Valid value types are: Integer: The number of days before the check-in date. For example, a value of 30 indicates the promotion only applies to bookings at least 30 days before the check-in date. ISO 8601 Duration (days, hours, and minutes): The number of days (and optionally hours/minutes) before the check-in date. For example, a value of P30D indicates the promotion only applies to bookings at least 30 days before the check-in date. A value of P30DT6H requires booking on or before 18:00 on the 30th day before arrival.
Promotions / HotelPromotions / Promotion / BookingWindow / @max	0..1	integer or duration	The maximum number of days prior to check-in when booking must occur for the promotion to be applied. If this isn't specified, or its value is 0, there is no maximum. Valid value types are: Integer: The number of days before the check-in date. For example, a value of 30 indicates the promotion only applies to bookings at most 30 days before the check-in date. ISO 8601 Duration (days, hours, and minutes): The number of days (and optionally hours/minutes) before the check-in date. For example, a value of P30D indicates the promotion only applies to bookings at most 30 days before the check-in date. A value of P30DT6H requires booking on or after 18:00 on the 30th day before arrival.
Promotions / HotelPromotions / Promotion / Ceiling	0..1	Ceiling	Defines restrictions on the maximum value that a rate can be set to after promotions are applied. Promotions must always specify a <Discount> or a <BestDailyDiscount>, so to create a promotion that only applies a <Ceiling>, one option is to set a <Discount> with a percentage of 0. If stacking is configured, then multiple promotions with <Ceiling> could apply to a single stay. Each promotion would apply its discount, immediately followed by its ceiling. The following example demonstrates how each ceiling contributes to the next promotion calculation in the stack. Example: Pricing a 1-night stay where AmountBeforeTax is 100 and there is a stack of two promotions: Promotion with stacking type base, a fixed_amount of 25, and a ceiling amount_per_night of 60 Promotion with stacking type second, fixed_amount of 25, and a ceiling amount_per_night of 90 Here is the order of calculation: The base promotion is applied first and discounts the AmountBeforeTax to 75, but then the ceiling lowers it to 60. The second promotion discounts the AmountBeforeTax from 60 to 35. This is below the ceiling of 90 so the second ceiling is not applied. The final rate is 35. The fact that 60 is a stricter overall ceiling is irrelevant since it is valid only for its own promotion, and there can be no single ceiling that spans the entire promotion stack.
Promotions / HotelPromotions / Promotion / Ceiling / @amount_per_night	1	float	The maximum amount that a nightly rate can be set to after the discount is applied. If a <Floor> element is also specified, this must be set to a value greater than or equal to the amount_per_night attribute in <Floor>. amount_per_night is applied to taxes and fees when they are included in the nightly rate using AmountAfterTax, but not those specified using TaxFeeInfo.
Promotions / HotelPromotions / Promotion / Floor	0..1	Floor	Defines restrictions on the minimum value that a rate can be set to after promotions are applied. Promotions must always specify a <Discount> or a <BestDailyDiscount>, so to create a promotion that only applies a <Floor>, one option is to set a <Discount> with a percentage of 0. <Floor> logic still applies to <FreeNights> discounts, even if the free night has a 100% discount applied to it. If stacking is configured, then multiple promotions with <Floor> could apply to a single stay. Each promotion would apply its discount, immediately followed by its floor. The following example demonstrates how each floor contributes to the next promotion calculation in the stack. Example: Pricing a 1-night stay where AmountBeforeTax is 100 and there is a stack of two promotions: Promotion with stacking type base, a fixed_amount of 25, and a floor amount_per_night of 90 Promotion with stacking type second, fixed_amount of 25, and a floor amount_per_night of 60 Here is the order of calculation: The base promotion is applied first and discounts the AmountBeforeTax to 75, but then the floor raises it up to 90. The second promotion discounts the AmountBeforeTax from 90 to 65. This is above the floor of 60 so the second floor is not applied. The final rate is 65. The fact that 90 is a stricter overall floor is irrelevant since it is valid only for its own promotion, and there can be no single floor that spans the entire promotion stack.
Promotions / HotelPromotions / Promotion / Floor / @amount_per_night	1	float	The minimum amount that a nightly rate can be set to after the discount is applied. If a <Ceiling> element is also specified, this must be set to a value less than or equal to the amount_per_night attribute in <Ceiling>. amount_per_night is applied to taxes and fees when they are included in the nightly rate using AmountAfterTax, but not those specified using TaxFeeInfo.
Promotions / HotelPromotions / Promotion / CheckinDates	0..1	CheckinDates	A container for one or more date ranges that define when check-in must occur for the promotion to be applied.
Promotions / HotelPromotions / Promotion / CheckinDates / DateRange	1..20	DateRange	A date range specifying when check-in must occur for the promotion to be applied. This element is not required if you're deleting one or more promotions. The YearlessDate format is also supported. If one of start or end is a yearless date, both must be populated as yearless dates. Yearless date ranges must not wrap around the new year. Instead, represent the range as two adjacent date ranges. For example, {"12-29", "01-05"} can be represented as {"12-29", "12-31"} and {"01-01", "01-05"}.
Promotions / HotelPromotions / Promotion / CheckinDates / DateRange / @start	0..1	Date or YearlessDate	The starting date (based on the property's time zone), inclusive, of the date range. This date must be before, or the same as, the end date. If start isn't specified, the date range is effectively unlimited in terms of a start date.
Promotions / HotelPromotions / Promotion / CheckinDates / DateRange / @end	0..1	Date or YearlessDate	The ending date (based on the property's time zone), inclusive, of the date range. This date must be the same as, or after, the start date. If end isn't specified, the date range is effectively unlimited in terms of an end date.
Promotions / HotelPromotions / Promotion / CheckinDates / DateRange / @days_of_week	0..1	string	The days of the week that are allowed in the date range. If not specified, all days are allowed in the date range. Each character in the string specifies a day. For example, "MTWHF" specifies that weekdays are allowed in the date range. Valid characters are: M for Monday T for Tuesday W for Wednesday H for Thursday F for Friday S for Saturday U for Sunday Any character combination is valid.
Promotions / HotelPromotions / Promotion / CheckoutDates	0..1	CheckoutDates	A container for one or more date ranges that define when check-out must occur for the promotion to be applied.
Promotions / HotelPromotions / Promotion / CheckoutDates / DateRange	1..20	DateRange	A date range specifying when check-out must occur for the promotion to be applied. This element is not required if you're deleting one or more promotions. The YearlessDate format is also supported. If one of start or end is a yearless date, both must be populated as yearless dates. Yearless date ranges must not wrap around the new year. Instead, represent the range as two adjacent date ranges. For example, {"12-29", "01-05"} can be represented as {"12-29", "12-31"} and {"01-01", "01-05"}.
Promotions / HotelPromotions / Promotion / CheckoutDates / DateRange / @start	0..1	Date or YearlessDate	The starting date (based on the property's time zone), inclusive, of the date range. This date must be before, or the same as, the end date. If start isn't specified, the date range is effectively unlimited in terms of a start date.
Promotions / HotelPromotions / Promotion / CheckoutDates / DateRange / @end	0..1	Date or YearlessDate	The ending date (based on the property's time zone), inclusive, of the date range. This date must be the same as, or after, the start date. If end isn't specified, the date range is effectively unlimited in terms of an end date.
Promotions / HotelPromotions / Promotion / CheckoutDates / DateRange / @days_of_week	0..1	string	The days of the week that are allowed in the date range. If not specified, all days are allowed in the date range. Each character in the string specifies a day. For example, "MTWHF" specifies that weekdays are allowed in the date range. Valid characters are: M for Monday T for Tuesday W for Wednesday H for Thursday F for Friday S for Saturday U for Sunday Any character combination is valid.
Promotions / HotelPromotions / Promotion / Devices	0..1	Devices	Container for listing the user devices that are eligible for the promotion. If specified, only eligible users on the listed devices are offered the discounted rate. If not specified, eligible users on any device are offered the discounted rate.
Promotions / HotelPromotions / Promotion / Devices / Device	1..3	Device	Defines one type of user device that is eligible for the promotion.
Promotions / HotelPromotions / Promotion / Devices / Device / @type	1	enum	A type of device. The value must be desktop, tablet, or mobile.
Promotions / HotelPromotions / Promotion / Discount	1	Discount	Exactly one of Discount or BestDailyDiscount must be specified. Specifies the discount to be applied for this promotion.
Promotions / HotelPromotions / Promotion / Discount / @percentage	0..1	float	Exactly one of percentage, fixed_amount, fixed_amount_per_night, fixed_price, or fixed_price_per_night is required. A decimal value from 0-100 which specifies the percentage discount. It is applied to AmountAfterTax (or AmountBeforeTax if AmountAfterTax isn't specified). Examples: If AmountAfterTax is 100 and percentage is 20, then promotion rate = AmountAfterTax * (1 - percentage discount) 80.00 = 100 * (1 - 0.2) If AmountBeforeTax is 100, percentage is 20 and TaxFeeInfo specifies a tax of 10, then promotion rate = AmountBeforeTax * (1 - percentage discount) + tax 90.00 = 100 * (1 - 0.2) + 10
Promotions / HotelPromotions / Promotion / Discount / @fixed_amount	0..1	float	Exactly one of percentage, fixed_amount, fixed_amount_per_night, fixed_price, or fixed_price_per_night is required. A fixed amount to be subtracted from the sum of the AmountAfterTax nightly rates (or sum of AmountBeforeTax nightly rates if AmountAfterTax isn't specified). It is assumed to be in the same currency as nightly rates. If this is larger than the sum of nightly rates, the resulting value is zero. Examples: If we're pricing a 1-night stay where AmountBeforeTax is 90, AmountAfterTax is 100, and fixed_amount is 20, then promotion rate = AmountAfterTax - fixed discount 80.00 = 100 - 20 If we're pricing a 1-night stay where AmountBeforeTax is 100, fixed_amount is 20, and TaxFeeInfo specifies a tax of 8%, then promotion rate = (AmountBeforeTax - fixed discount) * (1 + percentage tax) 86.40 = (100 - 20) * 1.08 If we're pricing a 1-night stay where AmountBeforeTax is 50, fixed_amount is 60, and TaxFeeInfo specifies a tax of 10, then promotion rate = (AmountBeforeTax - fixed discount) * tax 10.00 = 0 + 10 If we're pricing a 3-night stay where the AmountAfterTax values are 100, 110, and 120; and fixed_amount is 150, then promotion rate = sum(AmountAfterTax) - (fixed discount) 180.00 = (100 + 110 + 120) - 150
Promotions / HotelPromotions / Promotion / Discount / @fixed_amount_per_night	0..1	float	Exactly one of percentage, fixed_amount, fixed_amount_per_night, fixed_price, or fixed_price_per_night is required. A fixed discount applied to each of the AmountAfterTax nightly rates (or the cheapest N if applied_nights is specified). If AmountAfterTax isn't specified, it is applied to AmountBeforeTax. It is assumed to be in the same currency as nightly rates. If fixed_amount_per_night is larger than a nightly rate, that nightly rate is reduced to as zero—the discount cannot cause a nightly rate to become negative. Examples: If we're pricing a 3-night stay where the AmountAfterTax values are 100, 110, and 120; and the fixed_amount_per_night is 10, then promotion rate = sum(AmountBeforeTax - fixed amount discount) 300.00 = ((100 - 10) + (110 - 10) + (120 - 10)) If we're pricing a 3-night stay where the AmountAfterTax values are 10, 50, and 100; and the fixed_amount_per_night is 20, then promotion rate = sum(AmountAfterTax - fixed amount discount) 110.00 = (0 + (50 - 20) + (100 - 20))
Promotions / HotelPromotions / Promotion / Discount / @fixed_price	0..1	float	Exactly one of percentage, fixed_amount, fixed_amount_per_night, fixed_price, or fixed_price_per_night is required. If AmountAfterTax nightly rates are specified, then this sets the price for the stay, including taxes and fees, to the specified value. If AmountBeforeTax is specified, then whether or not AmountAfterTax is specified, this sets the pre-tax price for the stay to the specified value. It is assumed to be in the same currency as nightly rates. If AmountAfterTax is intended to reflect a percentage tax, then setting a fixed price for AmountBeforeTax can result in inaccurate taxes and fees. In general, it is strongly recommended to use TaxFeeInfo to specify a property's taxes and fees. Examples: If we're pricing a 1-night stay where AmountBeforeTax is 90, AmountAfterTax is 100, and fixed_price is 80, then the promotion rate is 80. If we're pricing a 1-night stay where AmountBeforeTax is 100, fixed_amount is 80, and TaxFeeInfo specifies a tax of 8%, then promotion rate = fixed price * (1 + percentage tax) 86.40 = 80 * 1.08 If we're pricing a 3-night stay where the AmountAfterTax values are 100, 110, and 120; and fixed_amount is 300, then promotion rate = 300
Promotions / HotelPromotions / Promotion / Discount / @fixed_price_per_night	0..1	float	Exactly one of percentage, fixed_amount, fixed_amount_per_night, fixed_price, or fixed_price_per_night is required. If AmountAfterTax nightly rates are specified, then this sets the price for each night of stay, including taxes and fees, to the specified value. If AmountBeforeTax is specified, then whether or not AmountAfterTax is specified, this sets the pre-tax price for each night of stay to the specified value. It is assumed to be in the same currency as nightly rates. If AmountAfterTax is intended to reflect a percentage tax, then setting a fixed price for AmountBeforeTax can result in inaccurate taxes and fees. In general, it is strongly recommended to use TaxFeeInfo to specify a property's taxes and fees. If applied_nights is specified, then the new price is applied to the cheapest N nights. Examples: If we're pricing a 2-night stay where AmountBeforeTax values are 90, 90; AmountAfterTax values are 100, 100; and fixed_price is 80, then the promotion rate is 80 + 80 = 160. If we're pricing a 2-night stay where AmountBeforeTax is 100, 100; fixed_amount is 80, and TaxFeeInfo specifies a tax of 8%, then the promotion rate is (80 + 80) * 1.08 = 172.8. If we're pricing a 3-night stay where the AmountAfterTax values are 100, 110, and 120; and fixed_amount is 110, then the promotion rate is 110 * 3 = 330.
Promotions / HotelPromotions / Promotion / Discount / @applied_nights	0..1	integer	This should only be used with percentage or fixed_amount_per_night. The number of nights to which the discount is applied, starting with the least expensive. Must be an integer from 1 to 99. If not specified, discount is applied to all nights.
Promotions / HotelPromotions / Promotion / Discount / FreeNights	0..1	FreeNights	Specifies a discount on certain nights of a stay when a minimum stay length is met. Attributes on the parent Discount element are not allowed if this element is used.
Promotions / HotelPromotions / Promotion / Discount / FreeNights / @stay_nights	1	integer	Number of required nights for the discount to be applied. Each discount is applied to a separate segment of stay nights. For example, for a 10-night stay where stay_nights is 4 (and repeats is true), then there are two stay night segments: the 1st through 4th nights and the 5th through 8th nights; the 9th and 10th nights are not part of a stay night segment.
Promotions / HotelPromotions / Promotion / Discount / FreeNights / @discount_nights	1	integer	The number of discounted nights within each segment of stay nights.
Promotions / HotelPromotions / Promotion / Discount / FreeNights / @discount_percentage	1	float	The discount that is applied to the discount nights. If this value is 50, then each selected night is 50% off.
Promotions / HotelPromotions / Promotion / Discount / FreeNights / @night_selection	1	string	Must be either cheapest or last. If last, then the nights at the end of the segment of stay nights are discounted. If cheapest, then the cheapest nights within the segment of stay nights are discounted.
Promotions / HotelPromotions / Promotion / Discount / FreeNights / @repeats	1	boolean	Whether the discount may be applied to multiple stay night segments. If false, then only the segment of stay nights at the beginning of the itinerary is discounted. If true, then any segment of stay nights is discounted. For example, if stay_nights is 4 and the itinerary is 10 nights, then, if repeats is true, then 2 segments are discounted (nights 1-4 and nights 5-8); but, if repeats is false, then only 1 segment is discounted (nights 1-4).
Promotions / HotelPromotions / Promotion / Discount / @rank	0..1	integer	Assigns this promotion a rank and opts it into ranked selection, where only the promotion with the lowest rank is selected to be applied. Values must be between 1 and 99, inclusive. If multiple promotions share the same rank, then one is arbitrarily selected and applied.
Promotions / HotelPromotions / Promotion / BestDailyDiscount	1	Discount	Exactly one of Discount or BestDailyDiscount must be specified. Specifies a daily discount which may be applied to a night of stay. This is in contrast with Discount, which applies discounts to entire stays. Each property may have a single group of promotions that are considered "best daily." This means that for each night of stay, the single "best daily" promotion that is eligible and yields the deepest discount for that night is selected and may be applied. Stacking may be specified with BestDailyDiscount. It must be set to either base or none. The "best daily" discounts yielding the deepest discount for each night are combined and treated as a single stay discount (i.e. Discount) while respecting the configured stacking type. This combined discount is compared against, and can be stacked with, other eligible <Discount> promotions to find the one or combination that provides the deepest discount. Either the combination of BestDailyDiscount or a single Discount, whichever yields the lower price, is selected and applied for the base stacking type. StayDates can be specified with this type of discount, but the application must be set to overlap .
Promotions / HotelPromotions / Promotion / BestDailyDiscount / @percentage	0..1	float	Exactly one of percentage, fixed_amount, or fixed_price is required. A decimal value from 0-100 which specifies the percentage discount. It is applied to AmountAfterTax (or AmountBeforeTax if AmountAfterTax isn't specified). Examples: If AmountAfterTax for a night of stay is 100 and percentage is 20, then promotion rate = AmountAfterTax * (1 - percentage discount) 80.00 = 100 * (1 - 0.2) If AmountBeforeTax for an ight of stay is 100, percentage is 20 and TaxFeeInfo specifies a tax of 10, then promotion rate = AmountBeforeTax * (1 - percentage discount) + tax 90.00 = 100 * (1 - 0.2) + 10
Promotions / HotelPromotions / Promotion/ BestDailyDiscount / @fixed_amount	0..1	float	Exactly one of percentage, fixed_amount, or fixed_price is required. A fixed amount to be subtracted from a single AmountAfterTax nightly rate (or AmountBeforeTax nightly rate if AmountAfterTax isn't specified). It is assumed to be in the same currency as nightly rates. If this is larger than the sum of nightly rates, the resulting value is zero. Examples: If AmountBeforeTax for a single night is 90, AmountAfterTax is 100, and fixed_amount is 20, then promotion rate = AmountAfterTax - fixed discount 80.00 = 100 - 20 If AmountBeforeTax for a single night is 100, fixed_amount is 20, and TaxFeeInfo specifies a tax of 8%, then promotion rate = (AmountBeforeTax - fixed discount) * (1 + percentage tax) 86.40 = (100 - 20) * 1.08
Promotions / HotelPromotions / Promotion/ BestDailyDiscount / @fixed_price	0..1	float	Exactly one of percentage, fixed_amount, or fixed_price is required. If AmountAfterTax nightly rates are specified, then this sets the price for the night of stay, including taxes and fees, to the specified value. If AmountBeforeTax is specified, then whether or not AmountAfterTax is specified, this sets the pre-tax price for the stay to the specified value. It is assumed to be in the same currency as nightly rates. Examples: If AmountBeforeTax for a single night is 90, AmountAfterTax is 100, and fixed_price is 80, then the promotion rate is 80. If AmountBeforeTax for a single night is 100, fixed_amount is 80, and TaxFeeInfo specifies a tax of 8%, then promotion rate = fixed price * (1 + percentage tax) 86.40 = 80 * 1.08
Promotions / HotelPromotions / Promotion / InventoryCount	0..1	InventoryCount	Defines restrictions on the number of rooms that must be available in order for this promotion to be applied. Discount is applied only to the nights which meet the constraint. Not allowed with the fixed_amount discount. Note that the number of available rooms is specified with either OTA_HotelInvCountNotifRQ (InvCount) or OTA_HotelAvailNotifRQ (BookingLimit).
Promotions / HotelPromotions / Promotion / InventoryCount / @min	0..1	integer	The minimum number of rooms that must be available for the promotion to be applied to the nightly rate. If this isn't specified, there is no minimum.
Promotions / HotelPromotions / Promotion / InventoryCount / @max	0..1	integer	The maximum number of rooms that must be available for the promotion to be applied to the nightly rate. If this isn't specified, there is no maximum.
Promotions / HotelPromotions / Promotion / LengthOfStay	0..1	LengthOfStay	Defines length of stay limits within which this promotion can be applied. The promotion is not applied when length of stay is outside of the min and max limits.
Promotions / HotelPromotions / Promotion / LengthOfStay / @min	0..1	integer	The minimum nights allowed in the stay for the promotion to be applied. If this isn't specified, there is no minimum.
Promotions / HotelPromotions / Promotion / LengthOfStay / @max	0..1	integer	The maximum nights allowed in the stay for the promotion to be applied. If this isn't specified, there is no maximum.
Promotions / HotelPromotions / Promotion / MembershipRateRule	0..1	MembershipRateRule	Container for a membership rate rule that triggers a specific UI treatment for the associated discount. This element should not be specified unless <Discount> is also specified.
Promotions / HotelPromotions / Promotion / MembershipRateRule / @id	1	string	ID of the rate rule associated with a membership program.
Promotions / HotelPromotions / Promotion / MinimumAmount	0..1	MinimumAmount	Specifies the minimum sum of the daily room rates (using the larger of AmountBeforeTax or AmountAfterTax) that must be exceeded for the promotion to be applied.
Promotions / HotelPromotions / Promotion / MinimumAmount / @before_discount	1	integer	The value that must be exceeded for the promotion to be applied.
Promotions / HotelPromotions / Promotion / Occupancy	0..1	Occupancy	Defines restrictions on occupancies for which this promotion is applied. The promotion is not applied when occupancy is outside of the min and max limits.
Promotions / HotelPromotions / Promotion / Occupancy / @min	0..1	integer	The user-specified occupancy must be at least this value in order for the discount to be applied.
Promotions / HotelPromotions / Promotion / Occupancy / @max	0..1	integer	The user-specified occupancy must be at most this value in order for the discount to be applied.
Promotions / HotelPromotions / Promotion / RatePlans	0..1	RatePlans	Container for a list of rate plans to which the promotion applies. If <RatePlans> isn't specified, the promotion applies to all rate plans.
Promotions / HotelPromotions / Promotion / RatePlans / RatePlan	1..n	RatePlan	Specifies a rate plan. A rate plan is defined by a combination of package, rates, and availability, as defined in Transaction (Property Data), OTA_HotelRateAmountNotifRQ, and OTA_HotelAvailNotifRQ messages, and as identified by the PackageID.
Promotions / HotelPromotions / Promotion / RatePlans / RatePlan / @id	1	string	The unique identifier for the rate plan. This value maps to the PackageID value in <PackageData> in a Transaction (Property Data) message, and in the RatePlanCode attribute in <StatusApplicationControl> in both <OTA_HotelRateAmountNotifRQ> and <OTA_HotelAvailNotifRQ> messages. The maximum number of characters allowed is 50.
Promotions / HotelPromotions / Promotion / RoomTypes	0..1	RoomTypes	Container for a list of room types to which the promotion applies. The promotion is applied to each <RoomType> specified. If <RoomTypes> isn't specified, the promotion applies to all rooms.
Promotions / HotelPromotions / Promotion / RoomTypes / RoomType	1..n	RoomType	Specifies a room type. A room type is defined in a <RoomData> element in a Transaction (Property Data) message and is referenced using its <RoomID> value. (Its <RoomID> value is also referenced by the InvTypeCode attribute in OTA_HotelRateAmountNotifRQ messages.)
Promotions / HotelPromotions / Promotion / RoomTypes / RoomType / @id	1	string	The unique identifier for the inventory (room type). This value maps to <RoomID> in a Transaction (Property Data) message. The maximum number of characters allowed is 50.
Promotions / HotelPromotions / Promotion / Stacking	0..1	Stacking	Specifies how promotions can be combined. If not specified, the "type" is assumed to be base.
Promotions / HotelPromotions / Promotion / Stacking / @type	1	enum	Multiple promotions can be applied to a single rate depending on this setting: any: Can be combined with any other promotion (except none), but the order in which the promotions should be applied is not guaranteed. base: The best eligible base promotion is selected and applied first, before other promotions. This was previously named base_only. second: The best eligible second promotion is selected and applied after a base promotion (if applicable) and before any promotions. none: Can not be combined with other promotions. Of the allowed combinations, the set of promotions which yields the largest discount are applied to the rate.
Promotions / HotelPromotions / Promotion / StayDates	0..1	StayDates	A container for one or more date ranges that determine how the promotion is applied, such as to accommodate seasonal discounts.
Promotions / HotelPromotions / Promotion / StayDates / @application	1	enum	Describes how the promotion should be applied. Valid values are: all: Applies the promotion to each night in the itinerary if all dates in the itinerary overlap with the stay dates. any: Applies the promotion to all nights in the itinerary if any date in the itinerary overlaps with a date in the stay dates range. overlap: Applies the promotion only to those nights in the itinerary that overlap with a date in the stay dates range. This attribute must always be specified. If <Discount> specifies percentage and application is set to all or any, the discount is applied as a percentage of the full stay. If <Discount> specifies percentage and application is set to overlap, the discount is applied as a percentage of nightly rates for overlapping nights. <Discount> specifying fixed_amount and application set to overlap is an invalid combination. <FreeNights> supports all application values. Note that for overlap, only overlapping nights of stay are considered for the discount requirements.
Promotions / HotelPromotions / Promotion / StayDates / DateRange	1..99	DateRange	A date range specifying dates when the promotion is to be applied. The YearlessDate format is also supported. If one of start or end is a yearless date, both must be populated as yearless dates. Yearless date ranges must not wrap around the new year. Instead, represent the range as two adjacent date ranges. For example, {"12-29", "01-05"} can be represented as {"12-29", "12-31"} and {"01-01", "01-05"}. If you want to set StayDates range to allow the promotion on specific days of the week, you should set the start date as the current date with no end so that the promotion doesn't expire.
Promotions / HotelPromotions / Promotion / StayDates / DateRange / @start	0..1	Date or YearlessDate	The starting date (based on the property's time zone), inclusive, of the date range. This date must be before, or the same as, the end date. If start isn't specified, the date range is effectively unlimited in terms of a start date. You should specify start value if the end value isn't provided.
Promotions / HotelPromotions / Promotion / StayDates / DateRange / @end	0..1	Date or YearlessDate	The ending date (based on the property's time zone), inclusive, of the date range. This date must be the same as, or after, the start date. If end isn't specified, the date range is effectively unlimited from the start date onwards. You should specify end value if the start value isn't provided.
Promotions / HotelPromotions / Promotion / StayDates / DateRange / @days_of_week	0..1	string	The days of the week that are allowed in the date range. If not specified, all days are allowed in the date range. Each character in the string specifies a day. For example, "MTWHF" specifies that weekdays are allowed in the date range. Valid characters are: M for Monday T for Tuesday W for Wednesday H for Thursday F for Friday S for Saturday U for Sunday Any character combination is valid.
Promotions / HotelPromotions / Promotion / UserCountries	0..1	UserCountries	Container for listing the user locations (countries) that are eligible for the promotion. If specified, only eligible users in the listed countries are offered the discounted rate. If not specified, eligible users in any country are offered the discounted rate.
Promotions / HotelPromotions / Promotion / UserCountries / @type	0..1	enum	The type of UserCountries specification. Valid values are include and exclude. If the UserCountries type is set as include, the promotion applies to users from the listed countries. If the UserCountries type is exclude, the promotion applies to users from outside the listed countries. If the UserCountries type is unset, it is treated as include and the promotion is applied to users from the listed countries.
Promotions / HotelPromotions / Promotion / UserCountries / Country	1..300	Country	Defines one country where users are eligible for the promotion.
Promotions / HotelPromotions / Promotion / UserCountries / Country / @code	1	string	A CLDR country code, such as DE or FR. Note that, for some countries, the CLDR country code isn't the same as the 2-letter ISO country code. Also, CLDR region codes are not supported.

Examples

There is a limit of 500 promotions per property. Refer to "Delete one promotion" example to remove promotions from a property.

Basic message

The following example shows a basic Promotions message:

<?xml version="1.0" encoding="UTF-8"?>
<Promotions partner="account_xyz"
            id="123_abc"
            timestamp="2020-05-18T16:20:00-04:00">
  <HotelPromotions hotel_id="Property_1">
    <Promotion id="1">
      <BookingDates>
         <DateRange start="2020-07-01" end="2020-07-31" days_of_week="MTWHF"/>
         <DateRange start="2020-09-01" end="2020-09-30"/>
      </BookingDates>
      <BookingWindow min="7" max="330"/>
      <CheckinDates>
         <DateRange start="2020-10-01" end="2020-10-31" days_of_week="FSU"/>
      </CheckinDates>
      <CheckoutDates>
         <DateRange start="2020-10-08" end="2020-11-07" days_of_week="FSU"/>
      </CheckoutDates>
      <Devices>
        <Device type="mobile"/>
        <Device type="tablet"/>
      </Devices>
      <Discount percentage="20" applied_nights="2"/>
      <LengthOfStay min="2" max="14"/>
      <RatePlans>
         <RatePlan id="234"/>
         <RatePlan id="567"/>
      </RatePlans>
      <RoomTypes>
         <RoomType id="123"/>
         <RoomType id="456"/>
      </RoomTypes>
      <Stacking type="base"/>
      <UserCountries>
        <Country code="US"/>
        <Country code="GB"/>
      </UserCountries>
    </Promotion>
  </HotelPromotions>
</Promotions>

Inventory condition

The following example shows how to create a discount if there is excess inventory close to the arrival date:

<?xml version="1.0" encoding="UTF-8"?>
<Promotions partner="account_xyz"
            id="123_abc"
            timestamp="2020-05-18T16:20:00-04:00">
  <HotelPromotions hotel_id="Property_1">
    <Promotion id="1">
      <BookingWindow max="7"/>
      <Discount percentage="10"/>
      <InventoryCount min="3"/>
    </Promotion>
  </HotelPromotions>
</Promotions>

Delete one promotion

The following example shows how to delete one promotion for a property:

<?xml version="1.0" encoding="UTF-8"?>
<Promotions partner="account_xyz"
            id="123_abc"
            timestamp="2020-05-18T16:20:00-04:00">
  <HotelPromotions hotel_id="Property_1">
    <Promotion id="1" action="delete"/>
  </HotelPromotions>
</Promotions>

Delete all promotions

The following example shows how to delete all promotions for a property:

<?xml version="1.0" encoding="UTF-8"?>
<Promotions partner="account_xyz"
            id="123_abc"
            timestamp="2020-05-18T16:20:00-04:00">
  <HotelPromotions hotel_id="Property_1" action="overlay"/>
</Promotions>

Overlay all promotions

The following example shows how to overlay <HotelPromotions> for a property with one or more new promotions. When action="overlay", all stored promotions are deleted prior to storing the promotions specified in the current message:

<?xml version="1.0" encoding="UTF-8"?>
<Promotions partner="account_xyz"
            id="123_abc"
            timestamp="2020-05-18T16:20:00-04:00">
  <HotelPromotions hotel_id="Property_1" action="overlay">
    <Promotion id="1">
      <BookingDates>
         <DateRange start="2020-09-01" end="2020-09-30"/>
      </BookingDates>
      <Discount percentage="10"/>
      <RoomTypes>
         <RoomType id="123"/>
         <RoomType id="456"/>
      </RoomTypes>
      <RatePlans>
         <RatePlan id="234"/>
         <RatePlan id="567"/>
      </RatePlans>
      <Stacking type="base"/>
    </Promotion>
  </HotelPromotions>
</Promotions>

3 Different Stacking Types

The following example shows a case where three different promotions would be applied (base, second, any). Note that the none promotion wouldn't be applied since the other promotions provide a better discount. If the original price was $100, the discounted price would be $72.90.

<?xml version="1.0" encoding="UTF-8"?>
<Promotions partner="account_xyz"
            id="123_abc"
            timestamp="2020-05-18T16:20:00-04:00">
  <HotelPromotions hotel_id="Property_1">
    <Promotion id="1">
      <Discount percentage="10"/>
      <Stacking type="base"/>
    </Promotion>
    <Promotion id="2">
      <Discount percentage="10"/>
      <Stacking type="second"/>
    </Promotion>
    <Promotion id="3">
      <Discount percentage="10"/>
      <Stacking type="any"/>
    </Promotion>
    <Promotion id="4">
      <Discount percentage="25"/>
      <Stacking type="none"/>
    </Promotion>
  </HotelPromotions>
</Promotions>

None Stacking Type

The following example shows a case where the none promotion is used because the combination of other promotions provides a smaller discount. If the original price was $100, the discounted price would be $75.

<?xml version="1.0" encoding="UTF-8"?>
<Promotions partner="account_xyz"
            id="123_abc"
            timestamp="2020-05-18T16:20:00-04:00">
  <HotelPromotions hotel_id="Property_1">
    <Promotion id="1">
      <Discount percentage="10"/>
      <Stacking type="base"/>
    </Promotion>
    <Promotion id="2">
      <Discount percentage="10"/>
      <Stacking type="any"/>
    </Promotion>
    <Promotion id="3">
      <Discount percentage="25"/>
      <Stacking type="none"/>
    </Promotion>
  </HotelPromotions>
</Promotions>

Booking Window Duration Bounds

The following example shows a case where the BookingWindow element is used with its start and end bounds defined as an ISO 8601 Duration type. This booking window restriction requires booking on or before 18:00 the day prior to arrival, and on or after 12:00 on the 2nd day before arrival.

<?xml version="1.0" encoding="UTF-8"?>
<Promotions partner="account_xyz"
            id="123_abc"
            timestamp="2020-05-18T16:20:00-04:00">
  <HotelPromotions hotel_id="Property_1">
    <Promotion id="1">
      <BookingWindow min="P1DT6H" max="P2DT12H"/>
      <Discount percentage="20"/>
    </Promotion>
  </HotelPromotions>
</Promotions>

Booking Dates DateTime Bounds

The following example shows a case where the BookingDates element is used with start and end attributes as DateTime types. This booking date restriction requires booking to occur between 06:30 on 2020-07-01 and 18:45 on 2020-07-02.

<?xml version="1.0" encoding="UTF-8"?>
<Promotions partner="account_xyz"
            id="123_abc"
            timestamp="2020-05-18T16:20:00-04:00">
  <HotelPromotions hotel_id="Property_1">
    <Promotion id="1">
      <BookingDates>
         <DateRange start="2020-07-01T06:30:00" end="2020-07-02T18:45:00"/>
      </BookingDates>
      <Discount percentage="20"/>
    </Promotion>
  </HotelPromotions>
</Promotions>

Yearless date ranges

The following example shows a case where the CheckInDates element contains DateRanges that have start and end fields without years. In this example, the promotion applies to check-in dates between 12/29 and 1/2, regardless of the year. Yearless date ranges that cross the new-year boundary are invalid, so the DateRange is expressed as two adjacent date ranges.

<?xml version="1.0" encoding="UTF-8"?>
<Promotions partner="account_xyz"
            id="123_abc"
            timestamp="2020-05-18T16:20:00-04:00">
  <HotelPromotions hotel_id="Property_1">
    <Promotion id="1">
      <CheckInDates>
         <DateRange start="12-29" end="12-31"/>
         <DateRange start="01-01" end="01-02"/>
      </CheckInDates>
      <Discount percentage="20"/>
    </Promotion>
  </HotelPromotions>
</Promotions>

FreeNights discount

The following example discounts two nights 50% for each four nights stayed for the specified range of booking dates. For a ten night itinerary, a total of four nights would be discounted 50%.

<?xml version="1.0" encoding="UTF-8"?>
<Promotions partner="account_xyz"
            id="123_abc"
            timestamp="2020-05-18T16:20:00-04:00">
  <HotelPromotions hotel_id="Property_1">
    <Promotion id="1">
      <BookingDates>
        <DateRange start="2022-01-01" end="2022-05-31"/>
      </BookingDates>
      <Discount>
        <FreeNights stay_nights="4" discount_nights="2" discount_percentage="50" night_selection="cheapest" repeats="true"/>
      </Discount>
    </Promotion>
  </HotelPromotions>
</Promotions>

The next example discounts one night 50% for each three nights stayed for the specified ranges of stay dates. Only the overlapping nights of stay count towards qualifying for the discount. For the following itinerary with check-in on 2022-01-01 and check-out on 2022-01-07, the qualified nights of stay and discounts are applied as follows.

• 2022-01-01 (stay)
• 2022-01-02 (stay)
• 2022-01-03
• 2022-01-04 (discounted)
• 2022-01-05 (stay)
• 2022-01-06 (stay)

<?xml version="1.0" encoding="UTF-8"?>
<Promotions partner="account_xyz"
            id="123_abc"
            timestamp="2020-05-18T16:20:00-04:00">
  <HotelPromotions hotel_id="Property_1">
    <Promotion id="1">
      <StayDates application="overlap">
        <DateRange start="2022-01-01" end="2022-01-02"/>
        <DateRange start="2022-01-04" end="2022-01-06"/>
      </StayDates>
      <Discount>
        <FreeNights stay_nights="3" discount_nights="1" discount_percentage="50" night_selection="last" repeats="true"/>
      </Discount>
    </Promotion>
  </HotelPromotions>
</Promotions>

Ranked Selection

The following example offers two discounts, one for 20% off and another for 15% off. During evaluation, only the 15% discount is applied because it has a lower rank.

<?xml version="1.0" encoding="UTF-8"?>
<Promotions partner="account_xyz"
            id="123_abc"
            timestamp="2020-05-18T16:20:00-04:00">
  <HotelPromotions hotel_id="Property_1">
    <Promotion id="1">
      <Discount percentage="15" rank="25"/>
    </Promotion>
    <Promotion id="2">
      <Discount percentage="20" rank="50"/>
    </Promotion>
  </HotelPromotions>
</Promotions>

BestDailyDiscount

The following example discounts a two night stay by applying BestDailyDiscount stacked with a Discount.

<?xml version="1.0" encoding="UTF-8"?>
<Promotions partner="account_xyz"
            id="123_abc"
            timestamp="2020-05-18T16:20:00-04:00">
 <HotelPromotions hotel_id="HotelID" action="overlay">
   <Promotion id="general">
     <BestDailyDiscount fixed_amount="20"/>
   </Promotion>
   <Promotion id="may">
     <BestDailyDiscount fixed_amount="50"/>
     <StayDates application="overlap">
        <DateRange start="2023-05-01" end="2023-05-31"/>
     </StayDates>
   </Promotion>
   <Promotion id="fiesta">
     <Discount fixed_amount_per_night="5"/>
     <Stacking type="any"/>
   </Promotion>
 </HotelPromotions>
</Promotions>

Consider a two night stay from April 30, 2023 to May 2, 2023 For calculation, the combination of best daily discounts that yields the deepest discount is found first.

For the first night, the "general" promotion is the only eligible amount with a fixed discount of 20.

For the second night, the "may" promotion offers a deeper discount than the "general" discount. So, when "may" is selected the fixed discount amount is 50.

Then for the stay, the "fiesta" promotion discounts to 5 per night, or 10 total. It can be stacked with the combination of best daily discounts because "fiesta" has stacking type set to any. If it were set to base, then only the combination of best daily discounts or the "fiesta" discount is applied. See description of Stacking for more information.

`Overall, the price of the stay receives a 20 + 50 + 10 = 80 fixed amount discount.

Responses

Syntax

The PromotionsResponse message uses the following syntax:

<?xml version="1.0" encoding="UTF-8"?>
<PromotionsResponse timestamp="timestamp"
                    id="message_ID"
                    partner="partner_key">
  <!-- Either Success or Issues are populated. -->
  <Success/>
  <Issues>
    <Issue code="issue_code"
           status="issue_type">
      issue_description
    </Issue>
  </Issues>
</PromotionsResponse>

Elements and Attributes

The PromotionsResponse message has the following elements and attributes:

Element / @Attribute	Occurrences	Type	Description
PromotionsResponse	1	Complex element	The root element indicating the success or issues for a received Promotions request message.
PromotionsResponse / @timestamp	1	DateTime	The creation date and time of this message.
PromotionsResponse / @id	1	string	The unique identifier from the associated Promotions message.
PromotionsResponse / @partner	1	string	The partner account for this message.
PromotionsResponse / Success	0..1	Success	Indicates that the Promotions message was processed successfully without warnings, errors, or failures. Either <Success> or <Issues> is present in each message.
PromotionsResponse / Issues	0..1	Issues	A container for one or more issues encountered while processing the Promotions message. Either <Success> or <Issues> is present in each message.
PromotionsResponse / Issues / Issue	1..n	Issue	The description of a warning, error, or failure encountered while processing the Promotions message. Details on these issues can be found in Feed Status Error Messages.
PromotionsResponse / Issues / Issue / @code	1	integer	The identifier for the issue.
PromotionsResponse / Issues / Issue / @status	1	enum	The type of issue encountered. Valid values are warning, error, and failure.

Examples

Success

The following is a response to a successfully processed Promotions message.

<?xml version="1.0" encoding="UTF-8"?>
<PromotionsResponse timestamp="2020-05-18T16:20:00-04:00"
                    id="12345678"
                    partner="partner_key">
  <Success/>
</PromotionsResponse>

Issues

The following is a response to a Promotions message not processed due to errors.

<?xml version="1.0" encoding="UTF-8"?>
<PromotionsResponse timestamp="2020-05-18T16:20:00-04:00"
                    id="12345678"
                    partner="partner_key">
  <Issues>
    <Issue code="1001" status="error">Example</Issue>
  </Issues>
</PromotionsResponse>