Package google.maps.places.v1

Index

Places (interface)
AddressDescriptor (message)
AddressDescriptor.Area (message)
AddressDescriptor.Area.Containment (enum)
AddressDescriptor.Landmark (message)
AddressDescriptor.Landmark.SpatialRelationship (enum)
AuthorAttribution (message)
AutocompletePlacesRequest (message)
AutocompletePlacesRequest.LocationBias (message)
AutocompletePlacesRequest.LocationRestriction (message)
AutocompletePlacesResponse (message)
AutocompletePlacesResponse.Suggestion (message)
AutocompletePlacesResponse.Suggestion.FormattableText (message)
AutocompletePlacesResponse.Suggestion.PlacePrediction (message)
AutocompletePlacesResponse.Suggestion.QueryPrediction (message)
AutocompletePlacesResponse.Suggestion.StringRange (message)
AutocompletePlacesResponse.Suggestion.StructuredFormat (message)
Circle (message)
ContentBlock (message)
ContextualContent (message)
ContextualContent.Justification (message)
ContextualContent.Justification.BusinessAvailabilityAttributesJustification (message)
ContextualContent.Justification.ReviewJustification (message)
ContextualContent.Justification.ReviewJustification.HighlightedText (message)
ContextualContent.Justification.ReviewJustification.HighlightedText.HighlightedTextRange (message)
EVChargeOptions (message)
EVChargeOptions.ConnectorAggregation (message)
EVConnectorType (enum)
FuelOptions (message)
FuelOptions.FuelPrice (message)
FuelOptions.FuelPrice.FuelType (enum)
GetPhotoMediaRequest (message)
GetPlaceRequest (message)
Photo (message)
PhotoMedia (message)
Place (message)
Place.AccessibilityOptions (message)
Place.AddressComponent (message)
Place.AreaSummary (message)
Place.Attribution (message)
Place.BusinessStatus (enum)
Place.GenerativeSummary (message)
Place.GoogleMapsLinks (message)
Place.OpeningHours (message)
Place.OpeningHours.Period (message)
Place.OpeningHours.Period.Point (message)
Place.OpeningHours.SecondaryHoursType (enum)
Place.OpeningHours.SpecialDay (message)
Place.ParkingOptions (message)
Place.PaymentOptions (message)
Place.PlusCode (message)
Place.SubDestination (message)
Polyline (message)
PriceLevel (enum)
References (message)
Review (message)
RouteModifiers (message)
RoutingParameters (message)
RoutingPreference (enum)
RoutingSummary (message)
RoutingSummary.Leg (message)
SearchNearbyRequest (message)
SearchNearbyRequest.LocationRestriction (message)
SearchNearbyRequest.RankPreference (enum)
SearchNearbyResponse (message)
SearchTextRequest (message)
SearchTextRequest.EVOptions (message)
SearchTextRequest.LocationBias (message)
SearchTextRequest.LocationRestriction (message)
SearchTextRequest.RankPreference (enum)
SearchTextRequest.SearchAlongRouteParameters (message)
SearchTextResponse (message)
TravelMode (enum)

Places

Service definition for the Places API. Note: every request (except for Autocomplete requests) requires a field mask set outside of the request proto (all/*, is not assumed). The field mask can be set via the HTTP header X-Goog-FieldMask. See: https://developers.google.com/maps/documentation/places/web-service/choose-fields

AutocompletePlaces

AutocompletePlaces
`rpc AutocompletePlaces(AutocompletePlacesRequest) returns (AutocompletePlacesResponse)` Returns predictions for the given input.

rpc AutocompletePlaces(AutocompletePlacesRequest) returns (AutocompletePlacesResponse)

Returns predictions for the given input.

GetPhotoMedia

GetPhotoMedia
`rpc GetPhotoMedia(GetPhotoMediaRequest) returns (PhotoMedia)` Get a photo media with a photo reference string.

rpc GetPhotoMedia(GetPhotoMediaRequest) returns (PhotoMedia)

Get a photo media with a photo reference string.

GetPlace

GetPlace
`rpc GetPlace(GetPlaceRequest) returns (Place)` Get the details of a place based on its resource name, which is a string in the `places/{place_id}` format.

rpc GetPlace(GetPlaceRequest) returns (Place)

Get the details of a place based on its resource name, which is a string in the places/{place_id} format.

SearchNearby

SearchNearby
`rpc SearchNearby(SearchNearbyRequest) returns (SearchNearbyResponse)` Search for places near locations.

rpc SearchNearby(SearchNearbyRequest) returns (SearchNearbyResponse)

Search for places near locations.

SearchText

SearchText
`rpc SearchText(SearchTextRequest) returns (SearchTextResponse)` Text query based place search.

rpc SearchText(SearchTextRequest) returns (SearchTextResponse)

Text query based place search.

AddressDescriptor

A relational description of a location. Includes a ranked set of nearby landmarks and precise containing areas and their relationship to the target location.

Fields

Fields
`landmarks[]`	`Landmark` A ranked list of nearby landmarks. The most recognizable and nearby landmarks are ranked first.
`areas[]`	`Area` A ranked list of containing or adjacent areas. The most recognizable and precise areas are ranked first.

landmarks[]

Landmark

A ranked list of nearby landmarks. The most recognizable and nearby landmarks are ranked first.

areas[]

Area

A ranked list of containing or adjacent areas. The most recognizable and precise areas are ranked first.

Area

Area information and the area's relationship with the target location.

Areas includes precise sublocality, neighborhoods, and large compounds that are useful for describing a location.

Fields
`name`	`string` The area's resource name.
`place_id`	`string` The area's place id.
`display_name`	`LocalizedText` The area's display name.
`containment`	`Containment` Defines the spatial relationship between the target location and the area.

Containment

Defines the spatial relationship between the target location and the area.

Enums
`CONTAINMENT_UNSPECIFIED`	The containment is unspecified.
`WITHIN`	The target location is within the area region, close to the center.
`OUTSKIRTS`	The target location is within the area region, close to the edge.
`NEAR`	The target location is outside the area region, but close by.

Landmark

Basic landmark information and the landmark's relationship with the target location.

Landmarks are prominent places that can be used to describe a location.

Fields
`name`	`string` The landmark's resource name.
`place_id`	`string` The landmark's place id.
`display_name`	`LocalizedText` The landmark's display name.
`types[]`	`string` A set of type tags for this landmark. For a complete list of possible values, see https://developers.google.com/maps/documentation/places/web-service/place-types.
`spatial_relationship`	`SpatialRelationship` Defines the spatial relationship between the target location and the landmark.
`straight_line_distance_meters`	`float` The straight line distance, in meters, between the center point of the target and the center point of the landmark. In some situations, this value can be longer than `travel_distance_meters`.
`travel_distance_meters`	`float` The travel distance, in meters, along the road network from the target to the landmark, if known. This value does not take into account the mode of transportation, such as walking, driving, or biking.

SpatialRelationship

Defines the spatial relationship between the target location and the landmark.

Enums
`NEAR`	This is the default relationship when nothing more specific below applies.
`WITHIN`	The landmark has a spatial geometry and the target is within its bounds.
`BESIDE`	The target is directly adjacent to the landmark.
`ACROSS_THE_ROAD`	The target is directly opposite the landmark on the other side of the road.
`DOWN_THE_ROAD`	On the same route as the landmark but not besides or across.
`AROUND_THE_CORNER`	Not on the same route as the landmark but a single turn away.
`BEHIND`	Close to the landmark's structure but further away from its street entrances.

AuthorAttribution

Information about the author of the UGC data. Used in Photo, and Review.

Fields

Fields
`display_name`	`string` Name of the author of the `Photo` or `Review`.
`uri`	`string` URI of the author of the `Photo` or `Review`.
`photo_uri`	`string` Profile photo URI of the author of the `Photo` or `Review`.

display_name

string

Name of the author of the Photo or Review.

uri

string

URI of the author of the Photo or Review.

photo_uri

string

Profile photo URI of the author of the Photo or Review.

AutocompletePlacesRequest

Request proto for AutocompletePlaces.

Fields
`input`	`string` Required. The text string on which to search.
`location_bias`	`LocationBias` Optional. Bias results to a specified location. At most one of `location_bias` or `location_restriction` should be set. If neither are set, the results will be biased by IP address, meaning the IP address will be mapped to an imprecise location and used as a biasing signal.
`location_restriction`	`LocationRestriction` Optional. Restrict results to a specified location. At most one of `location_bias` or `location_restriction` should be set. If neither are set, the results will be biased by IP address, meaning the IP address will be mapped to an imprecise location and used as a biasing signal.
`included_primary_types[]`	`string` Optional. Included primary Place type (for example, "restaurant" or "gas_station") in Place Types (https://developers.google.com/maps/documentation/places/web-service/place-types), or only `(regions)`, or only `(cities)`. A Place is only returned if its primary type is included in this list. Up to 5 values can be specified. If no types are specified, all Place types are returned.
`included_region_codes[]`	`string` Optional. Only include results in the specified regions, specified as up to 15 CLDR two-character region codes. An empty set will not restrict the results. If both `location_restriction` and `included_region_codes` are set, the results will be located in the area of intersection.
`language_code`	`string` Optional. The language in which to return results. Defaults to en-US. The results may be in mixed languages if the language used in `input` is different from `language_code` or if the returned Place does not have a translation from the local language to `language_code`.
`region_code`	`string` Optional. The region code, specified as a CLDR two-character region code. This affects address formatting, result ranking, and may influence what results are returned. This does not restrict results to the specified region. To restrict results to a region, use `region_code_restriction`.
`origin`	`LatLng` Optional. The origin point from which to calculate geodesic distance to the destination (returned as `distance_meters`). If this value is omitted, geodesic distance will not be returned.
`input_offset`	`int32` Optional. A zero-based Unicode character offset of `input` indicating the cursor position in `input`. The cursor position may influence what predictions are returned. If empty, defaults to the length of `input`.
`include_query_predictions`	`bool` Optional. If true, the response will include both Place and query predictions. Otherwise the response will only return Place predictions.
`session_token`	`string` Optional. A string which identifies an Autocomplete session for billing purposes. Must be a URL and filename safe base64 string with at most 36 ASCII characters in length. Otherwise an INVALID_ARGUMENT error is returned. The session begins when the user starts typing a query, and concludes when they select a place and a call to Place Details or Address Validation is made. Each session can have multiple queries, followed by one Place Details or Address Validation request. The credentials used for each request within a session must belong to the same Google Cloud Console project. Once a session has concluded, the token is no longer valid; your app must generate a fresh token for each session. If the `session_token` parameter is omitted, or if you reuse a session token, the session is charged as if no session token was provided (each request is billed separately). We recommend the following guidelines: Use session tokens for all Place Autocomplete calls. Generate a fresh token for each session. Using a version 4 UUID is recommended. Ensure that the credentials used for all Place Autocomplete, Place Details, and Address Validation requests within a session belong to the same Cloud Console project. Be sure to pass a unique session token for each new session. Using the same token for more than one session will result in each request being billed individually.

LocationBias

The region to search. The results may be biased around the specified region.

Fields

Fields
Union field `type`. `type` can be only one of the following:
`rectangle`	`Viewport` A viewport defined by a northeast and a southwest corner.
`circle`	`Circle` A circle defined by a center point and radius.

Union field type.

type can be only one of the following:

rectangle

Viewport

A viewport defined by a northeast and a southwest corner.

circle

Circle

A circle defined by a center point and radius.

LocationRestriction

The region to search. The results will be restricted to the specified region.

Fields

Fields
Union field `type`. `type` can be only one of the following:
`rectangle`	`Viewport` A viewport defined by a northeast and a southwest corner.
`circle`	`Circle` A circle defined by a center point and radius.

Union field type.

type can be only one of the following:

rectangle

Viewport

A viewport defined by a northeast and a southwest corner.

circle

Circle

A circle defined by a center point and radius.

AutocompletePlacesResponse

Response proto for AutocompletePlaces.

Fields

Fields
`suggestions[]`	`Suggestion` Contains a list of suggestions, ordered in descending order of relevance.

suggestions[]

Suggestion

Contains a list of suggestions, ordered in descending order of relevance.

Suggestion

An Autocomplete suggestion result.

Fields

Fields
Union field `kind`. `kind` can be only one of the following:
`place_prediction`	`PlacePrediction` A prediction for a Place.
`query_prediction`	`QueryPrediction` A prediction for a query.

Union field kind.

kind can be only one of the following:

place_prediction

PlacePrediction

A prediction for a Place.

query_prediction

QueryPrediction

A prediction for a query.

FormattableText

Text representing a Place or query prediction. The text may be used as is or formatted.

Fields

Fields
`text`	`string` Text that may be used as is or formatted with `matches`.
`matches[]`	`StringRange` A list of string ranges identifying where the input request matched in `text`. The ranges can be used to format specific parts of `text`. The substrings may not be exact matches of `input` if the matching was determined by criteria other than string matching (for example, spell corrections or transliterations). These values are Unicode character offsets of `text`. The ranges are guaranteed to be ordered in increasing offset values.

text

string

Text that may be used as is or formatted with matches.

matches[]

StringRange

A list of string ranges identifying where the input request matched in text. The ranges can be used to format specific parts of text. The substrings may not be exact matches of input if the matching was determined by criteria other than string matching (for example, spell corrections or transliterations).

These values are Unicode character offsets of text. The ranges are guaranteed to be ordered in increasing offset values.

PlacePrediction

Prediction results for a Place Autocomplete prediction.

Fields
`place`	`string` The resource name of the suggested Place. This name can be used in other APIs that accept Place names.
`place_id`	`string` The unique identifier of the suggested Place. This identifier can be used in other APIs that accept Place IDs.
`text`	`FormattableText` Contains the human-readable name for the returned result. For establishment results, this is usually the business name and address. `text` is recommended for developers who wish to show a single UI element. Developers who wish to show two separate, but related, UI elements may want to use `structured_format` instead. They are two different ways to represent a Place prediction. Users should not try to parse `structured_format` into `text` or vice versa. This text may be different from the `display_name` returned by GetPlace. May be in mixed languages if the request `input` and `language_code` are in different languages or if the Place does not have a translation from the local language to `language_code`.
`structured_format`	`StructuredFormat` A breakdown of the Place prediction into main text containing the name of the Place and secondary text containing additional disambiguating features (such as a city or region). `structured_format` is recommended for developers who wish to show two separate, but related, UI elements. Developers who wish to show a single UI element may want to use `text` instead. They are two different ways to represent a Place prediction. Users should not try to parse `structured_format` into `text` or vice versa.
`types[]`	`string` List of types that apply to this Place from Table A or Table B in https://developers.google.com/maps/documentation/places/web-service/place-types. A type is a categorization of a Place. Places with shared types will share similar characteristics.
`distance_meters`	`int32` The length of the geodesic in meters from `origin` if `origin` is specified. Certain predictions such as routes may not populate this field.

QueryPrediction

Prediction results for a Query Autocomplete prediction.

Fields

Fields
`text`	`FormattableText` The predicted text. This text does not represent a Place, but rather a text query that could be used in a search endpoint (for example, Text Search). `text` is recommended for developers who wish to show a single UI element. Developers who wish to show two separate, but related, UI elements may want to use `structured_format` instead. They are two different ways to represent a query prediction. Users should not try to parse `structured_format` into `text` or vice versa. May be in mixed languages if the request `input` and `language_code` are in different languages or if part of the query does not have a translation from the local language to `language_code`.
`structured_format`	`StructuredFormat` A breakdown of the query prediction into main text containing the query and secondary text containing additional disambiguating features (such as a city or region). `structured_format` is recommended for developers who wish to show two separate, but related, UI elements. Developers who wish to show a single UI element may want to use `text` instead. They are two different ways to represent a query prediction. Users should not try to parse `structured_format` into `text` or vice versa.

text

FormattableText

The predicted text. This text does not represent a Place, but rather a text query that could be used in a search endpoint (for example, Text Search).

text is recommended for developers who wish to show a single UI element. Developers who wish to show two separate, but related, UI elements may want to use structured_format instead. They are two different ways to represent a query prediction. Users should not try to parse structured_format into text or vice versa.

May be in mixed languages if the request input and language_code are in different languages or if part of the query does not have a translation from the local language to language_code.

structured_format

StructuredFormat

A breakdown of the query prediction into main text containing the query and secondary text containing additional disambiguating features (such as a city or region).

structured_format is recommended for developers who wish to show two separate, but related, UI elements. Developers who wish to show a single UI element may want to use text instead. They are two different ways to represent a query prediction. Users should not try to parse structured_format into text or vice versa.

StringRange

Identifies a substring within a given text.

Fields

Fields
`start_offset`	`int32` Zero-based offset of the first Unicode character of the string (inclusive).
`end_offset`	`int32` Zero-based offset of the last Unicode character (exclusive).

start_offset

int32

Zero-based offset of the first Unicode character of the string (inclusive).

end_offset

int32

Zero-based offset of the last Unicode character (exclusive).

StructuredFormat

Contains a breakdown of a Place or query prediction into main text and secondary text.

For Place predictions, the main text contains the specific name of the Place. For query predictions, the main text contains the query.

The secondary text contains additional disambiguating features (such as a city or region) to further identify the Place or refine the query.

Fields

Fields
`main_text`	`FormattableText` Represents the name of the Place or query.
`secondary_text`	`FormattableText` Represents additional disambiguating features (such as a city or region) to further identify the Place or refine the query.

main_text

FormattableText

Represents the name of the Place or query.

secondary_text

FormattableText

Represents additional disambiguating features (such as a city or region) to further identify the Place or refine the query.

Circle

Circle with a LatLng as center and radius.

Fields

Fields
`center`	`LatLng` Required. Center latitude and longitude. The range of latitude must be within [-90.0, 90.0]. The range of the longitude must be within [-180.0, 180.0].
`radius`	`double` Required. Radius measured in meters. The radius must be within [0.0, 50000.0].

center

LatLng

Required. Center latitude and longitude.

The range of latitude must be within [-90.0, 90.0]. The range of the longitude must be within [-180.0, 180.0].

radius

double

Required. Radius measured in meters. The radius must be within [0.0, 50000.0].

ContentBlock

A block of content that can be served individually.

Fields

Fields
`topic`	`string` The topic of the content, for example "overview" or "restaurant".
`content`	`LocalizedText` Content related to the topic.
`references`	`References` Experimental: See https://developers.google.com/maps/documentation/places/web-service/experimental/places-generative for more details. References that are related to this block of content.

topic

string

The topic of the content, for example "overview" or "restaurant".

content

LocalizedText

Content related to the topic.

references

References

Experimental: See https://developers.google.com/maps/documentation/places/web-service/experimental/places-generative for more details.

References that are related to this block of content.

ContextualContent

Experimental: See https://developers.google.com/maps/documentation/places/web-service/experimental/places-generative for more details.

Content that is contextual to the place query.

Fields

Fields
`reviews[]`	`Review` List of reviews about this place, contexual to the place query.
`photos[]`	`Photo` Information (including references) about photos of this place, contexual to the place query.
`justifications[]`	`Justification` Experimental: See https://developers.google.com/maps/documentation/places/web-service/experimental/places-generative for more details. Justifications for the place.

reviews[]

Review

List of reviews about this place, contexual to the place query.

photos[]

Photo

Information (including references) about photos of this place, contexual to the place query.

justifications[]

Justification

Experimental: See https://developers.google.com/maps/documentation/places/web-service/experimental/places-generative for more details.

Justifications for the place.

Justification

Experimental: See https://developers.google.com/maps/documentation/places/web-service/experimental/places-generative for more details.

Justifications for the place. Justifications answers the question of why a place could interest an end user.

Fields

Fields
Union field `justification`. `justification` can be only one of the following:
`review_justification`	`ReviewJustification` Experimental: See https://developers.google.com/maps/documentation/places/web-service/experimental/places-generative for more details.
`business_availability_attributes_justification`	`BusinessAvailabilityAttributesJustification` Experimental: See https://developers.google.com/maps/documentation/places/web-service/experimental/places-generative for more details.

Union field justification.

justification can be only one of the following:

review_justification

ReviewJustification

Experimental: See https://developers.google.com/maps/documentation/places/web-service/experimental/places-generative for more details.

business_availability_attributes_justification

BusinessAvailabilityAttributesJustification

Experimental: See https://developers.google.com/maps/documentation/places/web-service/experimental/places-generative for more details.

BusinessAvailabilityAttributesJustification

Experimental: See https://developers.google.com/maps/documentation/places/web-service/experimental/places-generative for more details. BusinessAvailabilityAttributes justifications. This shows some attributes a business has that could interest an end user.

Fields

Fields
`takeout`	`bool` If a place provides takeout.
`delivery`	`bool` If a place provides delivery.
`dine_in`	`bool` If a place provides dine-in.

takeout

bool

If a place provides takeout.

delivery

bool

If a place provides delivery.

dine_in

bool

If a place provides dine-in.

ReviewJustification

Experimental: See https://developers.google.com/maps/documentation/places/web-service/experimental/places-generative for more details.

User review justifications. This highlights a section of the user review that would interest an end user. For instance, if the search query is "firewood pizza", the review justification highlights the text relevant to the search query.

Fields

Fields
`highlighted_text`	`HighlightedText`
`review`	`Review` The review that the highlighted text is generated from.

highlighted_text

HighlightedText

review

Review

The review that the highlighted text is generated from.

HighlightedText

The text highlighted by the justification. This is a subset of the review itself. The exact word to highlight is marked by the HighlightedTextRange. There could be several words in the text being highlighted.

Fields

Fields
`text`	`string`
`highlighted_text_ranges[]`	`HighlightedTextRange` The list of the ranges of the highlighted text.

text

string

highlighted_text_ranges[]

HighlightedTextRange

The list of the ranges of the highlighted text.

HighlightedTextRange

The range of highlighted text.

Fields
`start_index`	`int32`
`end_index`	`int32`

EVChargeOptions

Information about the EV Charge Station hosted in Place. Terminology follows https://afdc.energy.gov/fuels/electricity_infrastructure.html One port could charge one car at a time. One port has one or more connectors. One station has one or more ports.

Fields

Fields
`connector_count`	`int32` Number of connectors at this station. However, because some ports can have multiple connectors but only be able to charge one car at a time (e.g.) the number of connectors may be greater than the total number of cars which can charge simultaneously.
`connector_aggregation[]`	`ConnectorAggregation` A list of EV charging connector aggregations that contain connectors of the same type and same charge rate.

connector_count

int32

Number of connectors at this station. However, because some ports can have multiple connectors but only be able to charge one car at a time (e.g.) the number of connectors may be greater than the total number of cars which can charge simultaneously.

connector_aggregation[]

ConnectorAggregation

A list of EV charging connector aggregations that contain connectors of the same type and same charge rate.

ConnectorAggregation

EV charging information grouped by [type, max_charge_rate_kw]. Shows EV charge aggregation of connectors that have the same type and max charge rate in kw.

Fields
`type`	`EVConnectorType` The connector type of this aggregation.
`max_charge_rate_kw`	`double` The static max charging rate in kw of each connector in the aggregation.
`count`	`int32` Number of connectors in this aggregation.
`availability_last_update_time`	`Timestamp` The timestamp when the connector availability information in this aggregation was last updated.
`available_count`	`int32` Number of connectors in this aggregation that are currently available.
`out_of_service_count`	`int32` Number of connectors in this aggregation that are currently out of service.

EVConnectorType

See http://ieeexplore.ieee.org/stamp/stamp.jsp?arnumber=6872107 for additional information/context on EV charging connector types.

Enums
`EV_CONNECTOR_TYPE_UNSPECIFIED`	Unspecified connector.
`EV_CONNECTOR_TYPE_OTHER`	Other connector types.
`EV_CONNECTOR_TYPE_J1772`	J1772 type 1 connector.
`EV_CONNECTOR_TYPE_TYPE_2`	IEC 62196 type 2 connector. Often referred to as MENNEKES.
`EV_CONNECTOR_TYPE_CHADEMO`	CHAdeMO type connector.
`EV_CONNECTOR_TYPE_CCS_COMBO_1`	Combined Charging System (AC and DC). Based on SAE. Type-1 J-1772 connector
`EV_CONNECTOR_TYPE_CCS_COMBO_2`	Combined Charging System (AC and DC). Based on Type-2 Mennekes connector
`EV_CONNECTOR_TYPE_TESLA`	The generic TESLA connector. This is NACS in the North America but can be non-NACS in other parts of the world (e.g. CCS Combo 2 (CCS2) or GB/T). This value is less representative of an actual connector type, and more represents the ability to charge a Tesla brand vehicle at a Tesla owned charging station.
`EV_CONNECTOR_TYPE_UNSPECIFIED_GB_T`	GB/T type corresponds to the GB/T standard in China. This type covers all GB_T types.
`EV_CONNECTOR_TYPE_UNSPECIFIED_WALL_OUTLET`	Unspecified wall outlet.

FuelOptions

The most recent information about fuel options in a gas station. This information is updated regularly.

Fields

Fields
`fuel_prices[]`	`FuelPrice` The last known fuel price for each type of fuel this station has. There is one entry per fuel type this station has. Order is not important.

fuel_prices[]

FuelPrice

The last known fuel price for each type of fuel this station has. There is one entry per fuel type this station has. Order is not important.

FuelPrice

Fuel price information for a given type.

Fields

Fields
`type`	`FuelType` The type of fuel.
`price`	`Money` The price of the fuel.
`update_time`	`Timestamp` The time the fuel price was last updated.

type

FuelType

The type of fuel.

price

Money

The price of the fuel.

update_time

Timestamp

The time the fuel price was last updated.

FuelType

Types of fuel.

Enums
`FUEL_TYPE_UNSPECIFIED`	Unspecified fuel type.
`DIESEL`	Diesel fuel.
`REGULAR_UNLEADED`	Regular unleaded.
`MIDGRADE`	Midgrade.
`PREMIUM`	Premium.
`SP91`	SP 91.
`SP91_E10`	SP 91 E10.
`SP92`	SP 92.
`SP95`	SP 95.
`SP95_E10`	SP95 E10.
`SP98`	SP 98.
`SP99`	SP 99.
`SP100`	SP 100.
`LPG`	LPG.
`E80`	E 80.
`E85`	E 85.
`METHANE`	Methane.
`BIO_DIESEL`	Bio-diesel.
`TRUCK_DIESEL`	Truck diesel.

GetPhotoMediaRequest

Request for fetching a photo of a place using a photo resource name.

Fields
`name`	`string` Required. The resource name of a photo media in the format: `places/{place_id}/photos/{photo_reference}/media`. The resource name of a photo as returned in a Place object's `photos.name` field comes with the format `places/{place_id}/photos/{photo_reference}`. You need to append `/media` at the end of the photo resource to get the photo media resource name.
`max_width_px`	`int32` Optional. Specifies the maximum desired width, in pixels, of the image. If the image is smaller than the values specified, the original image will be returned. If the image is larger in either dimension, it will be scaled to match the smaller of the two dimensions, restricted to its original aspect ratio. Both the max_height_px and max_width_px properties accept an integer between 1 and 4800, inclusively. If the value is not within the allowed range, an INVALID_ARGUMENT error will be returned. At least one of max_height_px or max_width_px needs to be specified. If neither max_height_px nor max_width_px is specified, an INVALID_ARGUMENT error will be returned.
`max_height_px`	`int32` Optional. Specifies the maximum desired height, in pixels, of the image. If the image is smaller than the values specified, the original image will be returned. If the image is larger in either dimension, it will be scaled to match the smaller of the two dimensions, restricted to its original aspect ratio. Both the max_height_px and max_width_px properties accept an integer between 1 and 4800, inclusively. If the value is not within the allowed range, an INVALID_ARGUMENT error will be returned. At least one of max_height_px or max_width_px needs to be specified. If neither max_height_px nor max_width_px is specified, an INVALID_ARGUMENT error will be returned.
`skip_http_redirect`	`bool` Optional. If set, skip the default HTTP redirect behavior and render a text format (for example, in JSON format for HTTP use case) response. If not set, an HTTP redirect will be issued to redirect the call to the image media. This option is ignored for non-HTTP requests.

GetPlaceRequest

Request for fetching a Place based on its resource name, which is a string in the places/{place_id} format.

Fields
`name`	`string` Required. The resource name of a place, in the `places/{place_id}` format.
`language_code`	`string` Optional. Place details will be displayed with the preferred language if available. Current list of supported languages: https://developers.google.com/maps/faq#languagesupport.
`region_code`	`string` Optional. The Unicode country/region code (CLDR) of the location where the request is coming from. This parameter is used to display the place details, like region-specific place name, if available. The parameter can affect results based on applicable law. For more information, see https://www.unicode.org/cldr/charts/latest/supplemental/territory_language_information.html. Note that 3-digit region codes are not currently supported.
`session_token`	`string` Optional. A string which identifies an Autocomplete session for billing purposes. Must be a URL and filename safe base64 string with at most 36 ASCII characters in length. Otherwise an INVALID_ARGUMENT error is returned. The session begins when the user starts typing a query, and concludes when they select a place and a call to Place Details or Address Validation is made. Each session can have multiple queries, followed by one Place Details or Address Validation request. The credentials used for each request within a session must belong to the same Google Cloud Console project. Once a session has concluded, the token is no longer valid; your app must generate a fresh token for each session. If the `session_token` parameter is omitted, or if you reuse a session token, the session is charged as if no session token was provided (each request is billed separately). We recommend the following guidelines: Use session tokens for all Place Autocomplete calls. Generate a fresh token for each session. Using a version 4 UUID is recommended. Ensure that the credentials used for all Place Autocomplete, Place Details, and Address Validation requests within a session belong to the same Cloud Console project. Be sure to pass a unique session token for each new session. Using the same token for more than one session will result in each request being billed individually.

Photo

Information about a photo of a place.

Fields
`name`	`string` Identifier. A reference representing this place photo which may be used to look up this place photo again (also called the API "resource" name: `places/{place_id}/photos/{photo}`).
`width_px`	`int32` The maximum available width, in pixels.
`height_px`	`int32` The maximum available height, in pixels.
`author_attributions[]`	`AuthorAttribution` This photo's authors.
`flag_content_uri`	`string` A link where users can flag a problem with the photo.
`google_maps_uri`	`string` A link to show the photo on Google Maps.

PhotoMedia

A photo media from Places API.

Fields

Fields
`name`	`string` The resource name of a photo media in the format: `places/{place_id}/photos/{photo_reference}/media`.
`photo_uri`	`string` A short-lived uri that can be used to render the photo.

name

string

The resource name of a photo media in the format: places/{place_id}/photos/{photo_reference}/media.

photo_uri

string

A short-lived uri that can be used to render the photo.

Place

All the information representing a Place.

Fields
`name`	`string` This Place's resource name, in `places/{place_id}` format. Can be used to look up the Place.
`id`	`string` The unique identifier of a place.
`display_name`	`LocalizedText` The localized name of the place, suitable as a short human-readable description. For example, "Google Sydney", "Starbucks", "Pyrmont", etc.
`types[]`	`string` A set of type tags for this result. For example, "political" and "locality". For the complete list of possible values, see Table A and Table B at https://developers.google.com/maps/documentation/places/web-service/place-types
`primary_type`	`string` The primary type of the given result. This type must one of the Places API supported types. For example, "restaurant", "cafe", "airport", etc. A place can only have a single primary type. For the complete list of possible values, see Table A and Table B at https://developers.google.com/maps/documentation/places/web-service/place-types
`primary_type_display_name`	`LocalizedText` The display name of the primary type, localized to the request language if applicable. For the complete list of possible values, see Table A and Table B at https://developers.google.com/maps/documentation/places/web-service/place-types
`national_phone_number`	`string` A human-readable phone number for the place, in national format.
`international_phone_number`	`string` A human-readable phone number for the place, in international format.
`formatted_address`	`string` A full, human-readable address for this place.
`short_formatted_address`	`string` A short, human-readable address for this place.
`address_components[]`	`AddressComponent` Repeated components for each locality level. Note the following facts about the address_components[] array: - The array of address components may contain more components than the formatted_address. - The array does not necessarily include all the political entities that contain an address, apart from those included in the formatted_address. To retrieve all the political entities that contain a specific address, you should use reverse geocoding, passing the latitude/longitude of the address as a parameter to the request. - The format of the response is not guaranteed to remain the same between requests. In particular, the number of address_components varies based on the address requested and can change over time for the same address. A component can change position in the array. The type of the component can change. A particular component may be missing in a later response.
`plus_code`	`PlusCode` Plus code of the place location lat/long.
`location`	`LatLng` The position of this place.
`viewport`	`Viewport` A viewport suitable for displaying the place on an average-sized map. This viewport should not be used as the physical boundary or the service area of the business.
`rating`	`double` A rating between 1.0 and 5.0, based on user reviews of this place.
`google_maps_uri`	`string` A URL providing more information about this place.
`website_uri`	`string` The authoritative website for this place, e.g. a business' homepage. Note that for places that are part of a chain (e.g. an IKEA store), this will usually be the website for the individual store, not the overall chain.
`reviews[]`	`Review` List of reviews about this place, sorted by relevance. A maximum of 5 reviews can be returned.
`regular_opening_hours`	`OpeningHours` The regular hours of operation.
`photos[]`	`Photo` Information (including references) about photos of this place. A maximum of 10 photos can be returned.
`adr_format_address`	`string` The place's address in adr microformat: http://microformats.org/wiki/adr.
`business_status`	`BusinessStatus` The business status for the place.
`price_level`	`PriceLevel` Price level of the place.
`attributions[]`	`Attribution` A set of data provider that must be shown with this result.
`icon_mask_base_uri`	`string` A truncated URL to an icon mask. User can access different icon type by appending type suffix to the end (eg, ".svg" or ".png").
`icon_background_color`	`string` Background color for icon_mask in hex format, e.g. #909CE1.
`current_opening_hours`	`OpeningHours` The hours of operation for the next seven days (including today). The time period starts at midnight on the date of the request and ends at 11:59 pm six days later. This field includes the special_days subfield of all hours, set for dates that have exceptional hours.
`current_secondary_opening_hours[]`	`OpeningHours` Contains an array of entries for the next seven days including information about secondary hours of a business. Secondary hours are different from a business's main hours. For example, a restaurant can specify drive through hours or delivery hours as its secondary hours. This field populates the type subfield, which draws from a predefined list of opening hours types (such as DRIVE_THROUGH, PICKUP, or TAKEOUT) based on the types of the place. This field includes the special_days subfield of all hours, set for dates that have exceptional hours.
`regular_secondary_opening_hours[]`	`OpeningHours` Contains an array of entries for information about regular secondary hours of a business. Secondary hours are different from a business's main hours. For example, a restaurant can specify drive through hours or delivery hours as its secondary hours. This field populates the type subfield, which draws from a predefined list of opening hours types (such as DRIVE_THROUGH, PICKUP, or TAKEOUT) based on the types of the place.
`editorial_summary`	`LocalizedText` Contains a summary of the place. A summary is comprised of a textual overview, and also includes the language code for these if applicable. Summary text must be presented as-is and can not be modified or altered.
`payment_options`	`PaymentOptions` Payment options the place accepts. If a payment option data is not available, the payment option field will be unset.
`parking_options`	`ParkingOptions` Options of parking provided by the place.
`sub_destinations[]`	`SubDestination` A list of sub destinations related to the place.
`fuel_options`	`FuelOptions` The most recent information about fuel options in a gas station. This information is updated regularly.
`ev_charge_options`	`EVChargeOptions` Information of ev charging options.
`generative_summary`	`GenerativeSummary` Experimental: See https://developers.google.com/maps/documentation/places/web-service/experimental/places-generative for more details. AI-generated summary of the place.
`area_summary`	`AreaSummary` Experimental: See https://developers.google.com/maps/documentation/places/web-service/experimental/places-generative for more details. AI-generated summary of the area that the place is in.
`address_descriptor`	`AddressDescriptor` The address descriptor of the place. Address descriptors include additional information that help describe a location using landmarks and areas. See address descriptor regional coverage in https://developers.google.com/maps/documentation/geocoding/address-descriptors/coverage.
`google_maps_links`	`GoogleMapsLinks` Links to trigger different Google Maps actions.
`utc_offset_minutes`	`int32` Number of minutes this place's timezone is currently offset from UTC. This is expressed in minutes to support timezones that are offset by fractions of an hour, e.g. X hours and 15 minutes.
`user_rating_count`	`int32` The total number of reviews (with or without text) for this place.
`takeout`	`bool` Specifies if the business supports takeout.
`delivery`	`bool` Specifies if the business supports delivery.
`dine_in`	`bool` Specifies if the business supports indoor or outdoor seating options.
`curbside_pickup`	`bool` Specifies if the business supports curbside pickup.
`reservable`	`bool` Specifies if the place supports reservations.
`serves_breakfast`	`bool` Specifies if the place serves breakfast.
`serves_lunch`	`bool` Specifies if the place serves lunch.
`serves_dinner`	`bool` Specifies if the place serves dinner.
`serves_beer`	`bool` Specifies if the place serves beer.
`serves_wine`	`bool` Specifies if the place serves wine.
`serves_brunch`	`bool` Specifies if the place serves brunch.
`serves_vegetarian_food`	`bool` Specifies if the place serves vegetarian food.
`outdoor_seating`	`bool` Place provides outdoor seating.
`live_music`	`bool` Place provides live music.
`menu_for_children`	`bool` Place has a children's menu.
`serves_cocktails`	`bool` Place serves cocktails.
`serves_dessert`	`bool` Place serves dessert.
`serves_coffee`	`bool` Place serves coffee.
`good_for_children`	`bool` Place is good for children.
`allows_dogs`	`bool` Place allows dogs.
`restroom`	`bool` Place has restroom.
`good_for_groups`	`bool` Place accommodates groups.
`good_for_watching_sports`	`bool` Place is suitable for watching sports.
`accessibility_options`	`AccessibilityOptions` Information about the accessibility options a place offers.

AccessibilityOptions

Information about the accessibility options a place offers.

Fields
`wheelchair_accessible_parking`	`bool` Place offers wheelchair accessible parking.
`wheelchair_accessible_entrance`	`bool` Places has wheelchair accessible entrance.
`wheelchair_accessible_restroom`	`bool` Place has wheelchair accessible restroom.
`wheelchair_accessible_seating`	`bool` Place has wheelchair accessible seating.

AddressComponent

The structured components that form the formatted address, if this information is available.

Fields
`long_text`	`string` The full text description or name of the address component. For example, an address component for the country Australia may have a long_name of "Australia".
`short_text`	`string` An abbreviated textual name for the address component, if available. For example, an address component for the country of Australia may have a short_name of "AU".
`types[]`	`string` An array indicating the type(s) of the address component.
`language_code`	`string` The language used to format this components, in CLDR notation.

AreaSummary

Experimental: See https://developers.google.com/maps/documentation/places/web-service/experimental/places-generative for more details.

AI-generated summary of the area that the place is in.

Fields

Fields
`content_blocks[]`	`ContentBlock` Content blocks that compose the area summary. Each block has a separate topic about the area.
`flag_content_uri`	`string` A link where users can flag a problem with the summary.

content_blocks[]

ContentBlock

Content blocks that compose the area summary. Each block has a separate topic about the area.

flag_content_uri

string

A link where users can flag a problem with the summary.

Attribution

Information about data providers of this place.

Fields

Fields
`provider`	`string` Name of the Place's data provider.
`provider_uri`	`string` URI to the Place's data provider.

provider

string

Name of the Place's data provider.

provider_uri

string

URI to the Place's data provider.

BusinessStatus

Business status for the place.

Enums
`BUSINESS_STATUS_UNSPECIFIED`	Default value. This value is unused.
`OPERATIONAL`	The establishment is operational, not necessarily open now.
`CLOSED_TEMPORARILY`	The establishment is temporarily closed.
`CLOSED_PERMANENTLY`	The establishment is permanently closed.

GenerativeSummary

Experimental: See https://developers.google.com/maps/documentation/places/web-service/experimental/places-generative for more details.

AI-generated summary of the place.

Fields
`overview`	`LocalizedText` The overview of the place.
`overview_flag_content_uri`	`string` A link where users can flag a problem with the overview summary.
`description`	`LocalizedText` The detailed description of the place.
`description_flag_content_uri`	`string` A link where users can flag a problem with the description summary.
`references`	`References` References that are used to generate the summary description.

GoogleMapsLinks

Links to trigger different Google Maps actions.

Fields
`directions_uri`	`string` A link to show the directions to the place. The link only populates the destination location and uses the default travel mode `DRIVE`.
`place_uri`	`string` A link to show this place.
`write_a_review_uri`	`string` A link to write a review for this place. This link is currently not supported on Google Maps Mobile and only works on the web version of Google Maps.
`reviews_uri`	`string` A link to show reviews of this place. This link is currently not supported on Google Maps Mobile and only works on the web version of Google Maps.
`photos_uri`	`string` A link to show photos of this place. This link is currently not supported on Google Maps Mobile and only works on the web version of Google Maps.

OpeningHours

Information about business hour of the place.

Fields
`periods[]`	`Period` The periods that this place is open during the week. The periods are in chronological order, starting with Sunday in the place-local timezone. An empty (but not absent) value indicates a place that is never open, e.g. because it is closed temporarily for renovations.
`weekday_descriptions[]`	`string` Localized strings describing the opening hours of this place, one string for each day of the week. Will be empty if the hours are unknown or could not be converted to localized text. Example: "Sun: 18:00–06:00"
`secondary_hours_type`	`SecondaryHoursType` A type string used to identify the type of secondary hours.
`special_days[]`	`SpecialDay` Structured information for special days that fall within the period that the returned opening hours cover. Special days are days that could impact the business hours of a place, e.g. Christmas day. Set for current_opening_hours and current_secondary_opening_hours if there are exceptional hours.
`open_now`	`bool` Whether the opening hours period is currently active. For regular opening hours and current opening hours, this field means whether the place is open. For secondary opening hours and current secondary opening hours, this field means whether the secondary hours of this place is active.

Period

A period the place remains in open_now status.

Fields

Fields
`open`	`Point` The time that the place starts to be open.
`close`	`Point` The time that the place starts to be closed.

open

Point

The time that the place starts to be open.

close

Point

The time that the place starts to be closed.

Point

Status changing points.

Fields
`date`	`Date` Date in the local timezone for the place.
`truncated`	`bool` Whether or not this endpoint was truncated. Truncation occurs when the real hours are outside the times we are willing to return hours between, so we truncate the hours back to these boundaries. This ensures that at most 24 * 7 hours from midnight of the day of the request are returned.
`day`	`int32` A day of the week, as an integer in the range 0-6. 0 is Sunday, 1 is Monday, etc.
`hour`	`int32` The hour in 2 digits. Ranges from 00 to 23.
`minute`	`int32` The minute in 2 digits. Ranges from 00 to 59.

SecondaryHoursType

A type used to identify the type of secondary hours.

Enums
`SECONDARY_HOURS_TYPE_UNSPECIFIED`	Default value when secondary hour type is not specified.
`DRIVE_THROUGH`	The drive-through hour for banks, restaurants, or pharmacies.
`HAPPY_HOUR`	The happy hour.
`DELIVERY`	The delivery hour.
`TAKEOUT`	The takeout hour.
`KITCHEN`	The kitchen hour.
`BREAKFAST`	The breakfast hour.
`LUNCH`	The lunch hour.
`DINNER`	The dinner hour.
`BRUNCH`	The brunch hour.
`PICKUP`	The pickup hour.
`ACCESS`	The access hours for storage places.
`SENIOR_HOURS`	The special hours for seniors.
`ONLINE_SERVICE_HOURS`	The online service hours.

SpecialDay

Structured information for special days that fall within the period that the returned opening hours cover. Special days are days that could impact the business hours of a place, e.g. Christmas day.

Fields

date

Date

The date of this special day.

ParkingOptions

Information about parking options for the place. A parking lot could support more than one option at the same time.

Fields
`free_parking_lot`	`bool` Place offers free parking lots.
`paid_parking_lot`	`bool` Place offers paid parking lots.
`free_street_parking`	`bool` Place offers free street parking.
`paid_street_parking`	`bool` Place offers paid street parking.
`valet_parking`	`bool` Place offers valet parking.
`free_garage_parking`	`bool` Place offers free garage parking.
`paid_garage_parking`	`bool` Place offers paid garage parking.

PaymentOptions

Payment options the place accepts.

Fields
`accepts_credit_cards`	`bool` Place accepts credit cards as payment.
`accepts_debit_cards`	`bool` Place accepts debit cards as payment.
`accepts_cash_only`	`bool` Place accepts cash only as payment. Places with this attribute may still accept other payment methods.
`accepts_nfc`	`bool` Place accepts NFC payments.

PlusCode

Plus code (http://plus.codes) is a location reference with two formats: global code defining a 14mx14m (1/8000th of a degree) or smaller rectangle, and compound code, replacing the prefix with a reference location.

Fields

global_code

string

Place's global (full) code, such as "9FWM33GV+HQ", representing an 1/8000 by 1/8000 degree area (~14 by 14 meters).

compound_code

string

Place's compound code, such as "33GV+HQ, Ramberg, Norway", containing the suffix of the global code and replacing the prefix with a formatted name of a reference entity.

SubDestination

Place resource name and id of sub destinations that relate to the place. For example, different terminals are different destinations of an airport.

Fields

name

string

The resource name of the sub destination.

id

string

The place id of the sub destination.

Polyline

A route polyline. Only supports an encoded polyline, which can be passed as a string and includes compression with minimal lossiness. This is the Routes API default output.

Fields

Union field polyline_type. Encapsulates the type of polyline. Routes API output defaults to encoded_polyline. polyline_type can be only one of the following:

encoded_polyline

string

An encoded polyline, as returned by the Routes API by default. See the encoder and decoder tools.

PriceLevel

Price level of the place.

Enums
`PRICE_LEVEL_UNSPECIFIED`	Place price level is unspecified or unknown.
`PRICE_LEVEL_FREE`	Place provides free services.
`PRICE_LEVEL_INEXPENSIVE`	Place provides inexpensive services.
`PRICE_LEVEL_MODERATE`	Place provides moderately priced services.
`PRICE_LEVEL_EXPENSIVE`	Place provides expensive services.
`PRICE_LEVEL_VERY_EXPENSIVE`	Place provides very expensive services.

References

Experimental: See https://developers.google.com/maps/documentation/places/web-service/experimental/places-generative for more details.

Reference that the generative content is related to.

Fields

reviews[]

Review

Reviews that serve as references.

places[]

string

The list of resource names of the referenced places. This name can be used in other APIs that accept Place resource names.

Review

Information about a review of a place.

Fields
`name`	`string` A reference representing this place review which may be used to look up this place review again (also called the API "resource" name: `places/{place_id}/reviews/{review}`).
`relative_publish_time_description`	`string` A string of formatted recent time, expressing the review time relative to the current time in a form appropriate for the language and country.
`text`	`LocalizedText` The localized text of the review.
`original_text`	`LocalizedText` The review text in its original language.
`rating`	`double` A number between 1.0 and 5.0, also called the number of stars.
`author_attribution`	`AuthorAttribution` This review's author.
`publish_time`	`Timestamp` Timestamp for the review.
`flag_content_uri`	`string` A link where users can flag a problem with the review.
`google_maps_uri`	`string` A link to show the review on Google Maps.

RouteModifiers

Encapsulates a set of optional conditions to satisfy when calculating the routes.

Fields
`avoid_tolls`	`bool` Optional. When set to true, avoids toll roads where reasonable, giving preference to routes not containing toll roads. Applies only to the `DRIVE` and `TWO_WHEELER` `TravelMode`.
`avoid_highways`	`bool` Optional. When set to true, avoids highways where reasonable, giving preference to routes not containing highways. Applies only to the `DRIVE` and `TWO_WHEELER` `TravelMode`.
`avoid_ferries`	`bool` Optional. When set to true, avoids ferries where reasonable, giving preference to routes not containing ferries. Applies only to the `DRIVE` and `TWO_WHEELER` `TravelMode`.
`avoid_indoor`	`bool` Optional. When set to true, avoids navigating indoors where reasonable, giving preference to routes not containing indoor navigation. Applies only to the `WALK` `TravelMode`.

RoutingParameters

Parameters to configure the routing calculations to the places in the response, both along a route (where result ranking will be influenced) and for calculating travel times on results.

Fields
`origin`	`LatLng` Optional. An explicit routing origin that overrides the origin defined in the polyline. By default, the polyline origin is used.
`travel_mode`	`TravelMode` Optional. The travel mode.
`route_modifiers`	`RouteModifiers` Optional. The route modifiers.
`routing_preference`	`RoutingPreference` Optional. Specifies how to compute the routing summaries. The server attempts to use the selected routing preference to compute the route. The traffic aware routing preference is only available for the `DRIVE` or `TWO_WHEELER` `travelMode`.

RoutingPreference

A set of values that specify factors to take into consideration when calculating the route.

Enums
`ROUTING_PREFERENCE_UNSPECIFIED`	No routing preference specified. Default to `TRAFFIC_UNAWARE`.
`TRAFFIC_UNAWARE`	Computes routes without taking live traffic conditions into consideration. Suitable when traffic conditions don't matter or are not applicable. Using this value produces the lowest latency. Note: For `TravelMode` `DRIVE` and `TWO_WHEELER`, the route and duration chosen are based on road network and average time-independent traffic conditions, not current road conditions. Consequently, routes may include roads that are temporarily closed. Results for a given request may vary over time due to changes in the road network, updated average traffic conditions, and the distributed nature of the service. Results may also vary between nearly-equivalent routes at any time or frequency.
`TRAFFIC_AWARE`	Calculates routes taking live traffic conditions into consideration. In contrast to `TRAFFIC_AWARE_OPTIMAL`, some optimizations are applied to significantly reduce latency.
`TRAFFIC_AWARE_OPTIMAL`	Calculates the routes taking live traffic conditions into consideration, without applying most performance optimizations. Using this value produces the highest latency.

RoutingSummary

The duration and distance from the routing origin to a place in the response, and a second leg from that place to the destination, if requested. Note: Adding routingSummaries in the field mask without also including either the routingParameters.origin parameter or the searchAlongRouteParameters.polyline.encodedPolyline parameter in the request causes an error.

Fields

legs[]

Leg

The legs of the trip.

When you calculate travel duration and distance from a set origin, legs contains a single leg containing the duration and distance from the origin to the destination. When you do a search along route, legs contains two legs: one from the origin to place, and one from the place to the destination.

directions_uri

string

A link to show directions on Google Maps using the waypoints from the given routing summary. The route generated by this link is not guaranteed to be the same as the route used to generate the routing summary. The link uses information provided in the request, from fields including routingParameters and searchAlongRouteParameters when applicable, to generate the directions link.

Leg

A leg is a single portion of a journey from one location to another.

Fields

duration

Duration

The time it takes to complete this leg of the trip.

distance_meters

int32

The distance of this leg of the trip.

SearchNearbyRequest

Request proto for Search Nearby.

Fields
`language_code`	`string` Place details will be displayed with the preferred language if available. If the language code is unspecified or unrecognized, place details of any language may be returned, with a preference for English if such details exist. Current list of supported languages: https://developers.google.com/maps/faq#languagesupport.
`region_code`	`string` The Unicode country/region code (CLDR) of the location where the request is coming from. This parameter is used to display the place details, like region-specific place name, if available. The parameter can affect results based on applicable law. For more information, see https://www.unicode.org/cldr/charts/latest/supplemental/territory_language_information.html. Note that 3-digit region codes are not currently supported.
`included_types[]`	`string` Included Place type (eg, "restaurant" or "gas_station") from https://developers.google.com/maps/documentation/places/web-service/place-types. Up to 50 types from Table A may be specified. If there are any conflicting types, i.e. a type appears in both included_types and excluded_types, an INVALID_ARGUMENT error is returned. If a Place type is specified with multiple type restrictions, only places that satisfy all of the restrictions are returned. For example, if we have {included_types = ["restaurant"], excluded_primary_types = ["restaurant"]}, the returned places provide "restaurant" related services but do not operate primarily as "restaurants".
`excluded_types[]`	`string` Excluded Place type (eg, "restaurant" or "gas_station") from https://developers.google.com/maps/documentation/places/web-service/place-types. Up to 50 types from Table A may be specified. If the client provides both included_types (e.g. restaurant) and excluded_types (e.g. cafe), then the response should include places that are restaurant but not cafe. The response includes places that match at least one of the included_types and none of the excluded_types. If there are any conflicting types, i.e. a type appears in both included_types and excluded_types, an INVALID_ARGUMENT error is returned. If a Place type is specified with multiple type restrictions, only places that satisfy all of the restrictions are returned. For example, if we have {included_types = ["restaurant"], excluded_primary_types = ["restaurant"]}, the returned places provide "restaurant" related services but do not operate primarily as "restaurants".
`included_primary_types[]`	`string` Included primary Place type (e.g. "restaurant" or "gas_station") from https://developers.google.com/maps/documentation/places/web-service/place-types. A place can only have a single primary type from the supported types table associated with it. Up to 50 types from Table A may be specified. If there are any conflicting primary types, i.e. a type appears in both included_primary_types and excluded_primary_types, an INVALID_ARGUMENT error is returned. If a Place type is specified with multiple type restrictions, only places that satisfy all of the restrictions are returned. For example, if we have {included_types = ["restaurant"], excluded_primary_types = ["restaurant"]}, the returned places provide "restaurant" related services but do not operate primarily as "restaurants".
`excluded_primary_types[]`	`string` Excluded primary Place type (e.g. "restaurant" or "gas_station") from https://developers.google.com/maps/documentation/places/web-service/place-types. Up to 50 types from Table A may be specified. If there are any conflicting primary types, i.e. a type appears in both included_primary_types and excluded_primary_types, an INVALID_ARGUMENT error is returned. If a Place type is specified with multiple type restrictions, only places that satisfy all of the restrictions are returned. For example, if we have {included_types = ["restaurant"], excluded_primary_types = ["restaurant"]}, the returned places provide "restaurant" related services but do not operate primarily as "restaurants".
`max_result_count`	`int32` Maximum number of results to return. It must be between 1 and 20 (default), inclusively. If the number is unset, it falls back to the upper limit. If the number is set to negative or exceeds the upper limit, an INVALID_ARGUMENT error is returned.
`location_restriction`	`LocationRestriction` Required. The region to search.
`rank_preference`	`RankPreference` How results will be ranked in the response.
`routing_parameters`	`RoutingParameters` Optional. Parameters that affect the routing to the search results.

LocationRestriction

The region to search.

Fields

Union field type.

type can be only one of the following:

circle

Circle

A circle defined by center point and radius.

RankPreference

How results will be ranked in the response.

Enums
`RANK_PREFERENCE_UNSPECIFIED`	RankPreference value not set. Will use rank by POPULARITY by default.
`DISTANCE`	Ranks results by distance.
`POPULARITY`	Ranks results by popularity.

SearchNearbyResponse

Response proto for Search Nearby.

Fields

places[]

Place

A list of places that meets user's requirements like places types, number of places and specific location restriction.

routing_summaries[]

RoutingSummary

A list of routing summaries where each entry associates to the corresponding place in the same index in the places field. If the routing summary is not available for one of the places, it will contain an empty entry. This list should have as many entries as the list of places if requested.

SearchTextRequest

Request proto for SearchText.

Fields
`text_query`	`string` Required. The text query for textual search.
`language_code`	`string` Place details will be displayed with the preferred language if available. If the language code is unspecified or unrecognized, place details of any language may be returned, with a preference for English if such details exist. Current list of supported languages: https://developers.google.com/maps/faq#languagesupport.
`region_code`	`string` The Unicode country/region code (CLDR) of the location where the request is coming from. This parameter is used to display the place details, like region-specific place name, if available. The parameter can affect results based on applicable law. For more information, see https://www.unicode.org/cldr/charts/latest/supplemental/territory_language_information.html. Note that 3-digit region codes are not currently supported.
`rank_preference`	`RankPreference` How results will be ranked in the response.
`included_type`	`string` The requested place type. Full list of types supported: https://developers.google.com/maps/documentation/places/web-service/place-types. Only support one included type.
`open_now`	`bool` Used to restrict the search to places that are currently open. The default is false.
`min_rating`	`double` Filter out results whose average user rating is strictly less than this limit. A valid value must be a float between 0 and 5 (inclusively) at a 0.5 cadence i.e. [0, 0.5, 1.0, ... , 5.0] inclusively. The input rating will round up to the nearest 0.5(ceiling). For instance, a rating of 0.6 will eliminate all results with a less than 1.0 rating.
`max_result_count (deprecated)`	`int32` This item is deprecated! Deprecated: Use `page_size` instead. The maximum number of results per page that can be returned. If the number of available results is larger than `max_result_count`, a `next_page_token` is returned which can be passed to `page_token` to get the next page of results in subsequent requests. If 0 or no value is provided, a default of 20 is used. The maximum value is 20; values above 20 will be coerced to 20. Negative values will return an INVALID_ARGUMENT error. If both `max_result_count` and `page_size` are specified, `max_result_count` will be ignored.
`page_size`	`int32` Optional. The maximum number of results per page that can be returned. If the number of available results is larger than `page_size`, a `next_page_token` is returned which can be passed to `page_token` to get the next page of results in subsequent requests. If 0 or no value is provided, a default of 20 is used. The maximum value is 20; values above 20 will be set to 20. Negative values will return an INVALID_ARGUMENT error. If both `max_result_count` and `page_size` are specified, `max_result_count` will be ignored.
`page_token`	`string` Optional. A page token, received from a previous TextSearch call. Provide this to retrieve the subsequent page. When paginating, all parameters other than `page_token`, `page_size`, and `max_result_count` provided to TextSearch must match the initial call that provided the page token. Otherwise an INVALID_ARGUMENT error is returned.
`price_levels[]`	`PriceLevel` Used to restrict the search to places that are marked as certain price levels. Users can choose any combinations of price levels. Default to select all price levels.
`strict_type_filtering`	`bool` Used to set strict type filtering for included_type. If set to true, only results of the same type will be returned. Default to false.
`location_bias`	`LocationBias` The region to search. This location serves as a bias which means results around given location might be returned. Cannot be set along with location_restriction.
`location_restriction`	`LocationRestriction` The region to search. This location serves as a restriction which means results outside given location will not be returned. Cannot be set along with location_bias.
`ev_options`	`EVOptions` Optional. Set the searchable EV options of a place search request.
`routing_parameters`	`RoutingParameters` Optional. Additional parameters for routing to results.
`search_along_route_parameters`	`SearchAlongRouteParameters` Optional. Additional parameters proto for searching along a route.

EVOptions

Searchable EV options of a place search request.

Fields

minimum_charging_rate_kw

double

Optional. Minimum required charging rate in kilowatts. A place with a charging rate less than the specified rate is filtered out.

connector_types[]

EVConnectorType

Optional. The list of preferred EV connector types. A place that does not support any of the listed connector types is filtered out.

LocationBias

The region to search. This location serves as a bias which means results around given location might be returned.

Fields

Union field type.

type can be only one of the following:

rectangle

Viewport

A rectangle box defined by northeast and southwest corner. rectangle.high() must be the northeast point of the rectangle viewport. rectangle.low() must be the southwest point of the rectangle viewport. rectangle.low().latitude() cannot be greater than rectangle.high().latitude(). This will result in an empty latitude range. A rectangle viewport cannot be wider than 180 degrees.

circle

Circle

A circle defined by center point and radius.

LocationRestriction

The region to search. This location serves as a restriction which means results outside given location will not be returned.

Fields

Union field type.

type can be only one of the following:

rectangle

Viewport

RankPreference

How results will be ranked in the response.

Enums
`RANK_PREFERENCE_UNSPECIFIED`	For a categorical query such as "Restaurants in New York City", RELEVANCE is the default. For non-categorical queries such as "Mountain View, CA" we recommend that you leave rankPreference unset.
`DISTANCE`	Ranks results by distance.
`RELEVANCE`	Ranks results by relevance. Sort order determined by normal ranking stack.

SearchAlongRouteParameters

Specifies a precalculated polyline from the Routes API defining the route to search. Searching along a route is similar to using the locationBias or locationRestriction request option to bias the search results. However, while the locationBias and locationRestriction options let you specify a region to bias the search results, this option lets you bias the results along a trip route.

Results are not guaranteed to be along the route provided, but rather are ranked within the search area defined by the polyline and, optionally, by the locationBias or locationRestriction based on minimal detour times from origin to destination. The results might be along an alternate route, especially if the provided polyline does not define an optimal route from origin to destination.

Fields

polyline

Polyline

Required. The route polyline.

SearchTextResponse

Response proto for SearchText.

Fields
`places[]`	`Place` A list of places that meet the user's text search criteria.
`routing_summaries[]`	`RoutingSummary` A list of routing summaries where each entry associates to the corresponding place in the same index in the `places` field. If the routing summary is not available for one of the places, it will contain an empty entry. This list will have as many entries as the list of places if requested.
`contextual_contents[]`	`ContextualContent` Experimental: See https://developers.google.com/maps/documentation/places/web-service/experimental/places-generative for more details. A list of contextual contents where each entry associates to the corresponding place in the same index in the places field. The contents that are relevant to the `text_query` in the request are preferred. If the contextual content is not available for one of the places, it will return non-contextual content. It will be empty only when the content is unavailable for this place. This list will have as many entries as the list of places if requested.
`next_page_token`	`string` A token that can be sent as `page_token` to retrieve the next page. If this field is omitted or empty, there are no subsequent pages.
`search_uri`	`string` A link allows the user to search with the same text query as specified in the request on Google Maps.

TravelMode

Travel mode options. These options map to what Routes API offers.

Enums
`TRAVEL_MODE_UNSPECIFIED`	No travel mode specified. Defaults to `DRIVE`.
`DRIVE`	Travel by passenger car.
`BICYCLE`	Travel by bicycle. Not supported with `search_along_route_parameters`.
`WALK`	Travel by walking. Not supported with `search_along_route_parameters`.
`TWO_WHEELER`	Motorized two wheeled vehicles of all kinds such as scooters and motorcycles. Note that this is distinct from the `BICYCLE` travel mode which covers human-powered transport. Not supported with `search_along_route_parameters`. Only supported in those countries listed at Countries and regions supported for two-wheeled vehicles.