Enable turn-by-turn data feed

A turn-by-turn data feed provides navigation-only information to devices not designed for map-based navigation guidance. It provides upcoming maneuvers with elements you supply:

• icons (left, right, U-turn)
• turn numbers in roundabouts
• road names
• estimated distances and time to the next navigation step or final destination

You can use the turn-by-turn feed to create experiences where the full Navigation SDK UI is not appropriate, such as for Android Auto or for small screen displays where a full Android stack is not available. For example, you might use this for two-wheeled vehicle drivers, where you can project navigation-only guidance to help them reach their destinations faster and more confidently with minimal distractions.

To use the SDK, you'll create a service and register it with the Navigation SDK for Android so that it can receive new navigation information in real time (about once a second during navigation).

This document shows you how to create and register a navigation service that receives navigation information from the SDK and provides the navigation state to the receiving device.

Overview

This section describes how to add the TurnByTurn library to your projects and summarizes the high-level flow for building turn-by-turn functionality.

Add the TurnByTurn library to your project using Maven (recommended)

Note: You can skip this step if have already set up your app with the Navigation SDK, which itself contains the TurnByTurn library.

To consume a standalone version of the TurnByTurn library, follow these steps:

1. Set up your environment to access the host Maven repository:

   Maven

   Add the following to your pom.xml file:

       <project>
         ...
         <repositories>
           <repository>
             <id>google-maven-repository</id>
             <url>https://maven.google.com</url>
           </repository>
         </repositories>
         ...
       </project>
       
       

   Gradle

   Add the following to your build.gradle file:

   repositories {
       ...
       google()
   }
       

2. Add the following dependency to your Maven or Gradle configuration:

   Maven

   <dependencies>
     ...
     <dependency>
       <groupId>com.google.android.maps</groupId>
       <artifactId>google_turnbyturn</artifactId>
       <version>1.0.0</version>
     </dependency>
   </dependencies>
       
       

   Gradle

   dependencies {
     ...
     implementation 'com.google.android.maps:google_turnbyturn:1.0.0'
   }
       

Add the TurnByTurn library to your project using a downloaded JAR file (alternative)

The TurnByTurn library is available as a JAR file in this SDK folder. If you don't have access, contact your representative.

1. Download and unzip google_turnbyturn_*.jar.
2. Copy the downloaded JAR file into your project's app/libs directory.

3. Add the following to your build.gradle to include the JAR in your build.

   dependencies {
       ...
       api fileTree(include: ['*.jar'], dir: 'libs')
   }
   

Using the TurnByTurn Library

Here are the high-level steps for enabling turn-by-turn functionality. The sections that follow provide details about each step.

1. Create a service to receive navigation updates.

2. Register the service.

3. Understand navigation states.

4. See a navigation display example that shows essential elements.

Create a service to receive navigation updates

The Navigation SDK binds to your TurnByTurn service and sends it navigation updates through the Android Messenger . You can create a new navigation service for these updates, or use an existing service.

The benefit of using a service to receive navigation updates is that the service can live in a separate background process.

The service in the following example receives navigation information and uses the TurnByTurnManager to convert the data into a NavInfo object that contains the navigation details.

/**
 *   Receives turn-by-turn navigation information forwarded from NavSDK.
 */
public class NavInfoReceivingService extends Service {
  /** The messenger used by the service to receive nav step updates. */
  private Messenger incomingMessenger;
  private TurnByTurnManager turnByTurnManager;

  private final class IncomingNavStepHandler extends Handler {
    public IncomingNavStepHandler(Looper looper) {
      super(looper);
    }

    @Override
    public void handleMessage(Message msg) {
      // Identify the message through the msg.what field.
      if (TurnByTurnManager.MSG_NAV_INFO == msg.what) {
        // Extract the NavInfo object using the TurnByTurnManager.
        NavInfo navInfo = turnByTurnManager
          .readNavInfoFromBundle(msg.getData()));
      // Do something with the NavInfo
    }
  }
}

@Nullable
@Override
public IBinder onBind(Intent intent) {
  return incomingMessenger.getBinder();
}

@Override
public void onCreate() {
  turnByTurnManager = TurnByTurnManager.createInstance();
  HandlerThread thread =
    new HandlerThread("NavInfoReceivingService",
      Process.THREAD_PRIORITY_DEFAULT);
  thread.start();
  incomingMessenger = new Messenger(
    new IncomingNavStepHandler(thread.getLooper()));
}

Message codes

NavInfo messages can be identified through the Message.what field of the Message class, which is set to the value of TurnByTurnManager.MSG_NAV_INFO.

Note: Be sure to aside the value range 7200-7299 for message codes, because the Navigation SDK might use message codes in that range in the future.

Registering the service for navigation updates

The following code snippets registers the navigation service.

boolean isNavInfoReceivingServiceRegistered =
          navigator.registerServiceForNavUpdates(
              getPackageName(), NavInfoReceivingService.class.getName(), numNextStepsToPreview);

Starting and stopping the service

The navigation service is active as long as the Navigation SDK binds to it. You can manually call startService() and stopService() to control the navigation service life cycle, but when you register your service with the Navigation SDK, your service starts automatically, and only stops when you unregister it. Depending on how you set up your app, you may want to consider starting a foreground service, described in the Android documentation Services overview.

Unregistering the service

To stop receiving navigation updates, unregister the service from the Navigation SDK.

navigator.unregisterServiceForNavUpdates();

Understand navigation states

Use NavInfo.getNavState() to get the current state of navigation, which is one of the following:

• Enroute - The ENROUTE state means that guided navigation is currently active and the user is on the provided route. Information about the current upcoming maneuver step is available.

• Rerouting - REROUTING means that navigation is in progress, but the navigator is looking for a new route. The upcoming maneuver step is not available, because there's no new route yet. In the sample app, a "Rerouting..." message appears in the navigation info display. Once a route is found, a NavInfo message is sent with the state ENROUTE.

• Stopped - STOPPED means navigation has ended. For example, navigation stops when the user exits navigation in the app. In the sample app, a STOPPED state clears the navigation info display to prevent lingering step instructions from being displayed.

Populate the feed display

Now that you have set up your turn-by-turn service, this section covers the visual and text elements you can use to populate the guidance cards for the turn-by-turn feed.

Navigation card information fields

When the user enters guided navigation, a navigation card appears at the top, containing navigation data populated from the Navigation SDK. The related image shows an example of these essential navigation elements.

This table shows the fields for navigation info and where you find them.

Fields for each navigation step	Fields for the overall trip
Found in StepInfo	Found in NavInfo
Full road name	Remaining time
The maneuver icon	Distance to destination
Distance to the next step
Lane guidance fields

Lane guidance

The Navigation SDK represents lanes in the navigation turn card as Lane and LaneDirection data objects. A Lane object represents a specific lane during navigation and has a list of LaneDirection objects which describe all the turns that can be made from this lane.

The recommended direction a user should take in a lane is marked by the isRecommended field.

Lane guidance example

The following snippet illustrates the data representation of the lanes displayed above.

// Lane 1
LaneDirections = [{/*laneShape=*/ STRAIGHT, /*isRecommended=*/ false},
                  {/*laneShape=*/ SLIGHT_LEFT, /*isRecommended=*/ true}]

// Lane 2
LaneDirections = [{/*laneShape=*/ STRAIGHT, /*isRecommended=*/ false}]

Create icons for maneuvers

The Maneuver enum defines each possible maneuver that could occur while navigating, and you can get the maneuver for a given step from the StepInfo.getManeuver() method.

You must create maneuver icons and pair them with their associated maneuvers. For some maneuvers, you can set up a one-to-one mapping to an icon, such as DESTINATION_LEFT and DESTINATION_RIGHT. However, since some maneuvers are similar, you might want to map more than one maneuver to a single icon. For example TURN_LEFT and ON_RAMP_LEFT could both map to the left turn icon.

Android Auto maneuvers: Maneuvers in the Navigation SDK have a one-to-one mapping to Android Auto, but you must convert the types to the correct format for Android Auto. See Ensure correct maneuver types in Enable navigation for Android Auto.

Some maneuvers contain an additional clockwise or counterclockwise label, which the SDK determines based on the driving side of a country. For example, in countries where driving is on the left side of the road, drivers take a roundabout or U-turn in a clockwise direction, whereas right-side-of-the-road countries go clockwise. The Navigation SDK detects whether a maneuver occurs in left- or right-side traffic and outputs the appropriate maneuver. Therefore, your maneuver icon may be different for a clockwise versus a counterclockwise maneuver.

Expand to see examples icons for different maneuvers

Sample Icon	TurnByTurn Maneuvers
	DEPART UNKNOWN
	STRAIGHT ON_RAMP_UNSPECIFIED OFF_RAMP_UNSPECIFIED NAME_CHANGE
	TURN_RIGHT ON_RAMP_RIGHT
	TURN_LEFT ON_RAMP_LEFT
	TURN_SLIGHT_RIGHT ON_RAMP_SLIGHT_RIGHT OFF_RAMP_SLIGHT_RIGHT
	TURN_SLIGHT_LEFT ON_RAMP_SLIGHT_LEFT OFF_RAMP_SLIGHT_LEFT
	TURN_SHARP_RIGHT ON_RAMP_SHARP_RIGHT OFF_RAMP_SHARP_RIGHT
	TURN_SHARP_LEFT ON_RAMP_SHARP_LEFT OFF_RAMP_SHARP_LEFT
	TURN_U_TURN_COUNTERCLOCKWISE ON_RAMP_U_TURN_COUNTERCLOCKWISE OFF_RAMP_U_TURN_COUNTERCLOCKWISE
	TURN_U_TURN_CLOCKWISE ON_RAMP_U_TURN_CLOCKWISE OFF_RAMP_U_TURN_CLOCKWISE
	ROUNDABOUT_SHARP_RIGHT_COUNTERCLOCKWISE
	ROUNDABOUT_SHARP_RIGHT_CLOCKWISE
	ROUNDABOUT_RIGHT_COUNTERCLOCKWISE
	ROUNDABOUT_RIGHT_CLOCKWISE
	ROUNDABOUT_SLIGHT_RIGHT_COUNTERCLOCKWISE
	ROUNDABOUT_SLIGHT_RIGHT_CLOCKWISE
	ROUNDABOUT_STRAIGHT_COUNTERCLOCKWISE
	ROUNDABOUT_STRAIGHT_CLOCKWISE
	ROUNDABOUT_SLIGHT_LEFT_COUNTERCLOCKWISE
	ROUNDABOUT_SLIGHT_LEFT_CLOCKWISE
	ROUNDABOUT_LEFT_COUNTERCLOCKWISE
	ROUNDABOUT_LEFT_CLOCKWISE
	ROUNDABOUT_SHARP_LEFT_COUNTERCLOCKWISE
	ROUNDABOUT_SHARP_LEFT_CLOCKWISE
	ROUNDABOUT_U_TURN_COUNTERCLOCKWISE
	ROUNDABOUT_U_TURN_CLOCKWISE
	ROUNDABOUT_COUNTERCLOCKWISE
	ROUNDABOUT_CLOCKWISE
	ROUNDABOUT_EXIT_COUNTERCLOCKWISE
	ROUNDABOUT_EXIT_CLOCKWISE
	MERGE_RIGHT OFF_RAMP_RIGHT
	MERGE_LEFT OFF_RAMP_LEFT
	FORK_RIGHT TURN_KEEP_RIGHT ON_RAMP_KEEP_RIGHT OFF_RAMP_KEEP_RIGHT
	FORK_LEFT TURN_KEEP_LEFT ON_RAMP_KEEP_LEFT OFF_RAMP_KEEP_LEFT
	MERGE_UNSPECIFIED
	DESTINATION
	DESTINATION_RIGHT
	DESTINATION_LEFT
	FERRY_BOAT
	FERRY_TRAIN

Use generated icons

To facilitate Android Auto use cases, the Navigation SDK supports generation of maneuver and lane guidance icons. These icons fit the image sizing guidance of the Android Auto Car App library which recommends targeting a 500 x 74 dp bounding box. See setsLaneImage and CarIcon in the Android reference documentation for details.

Note: Icon generation is disabled by default.

Icon generation example

NavigationUpdatesOptions options =
  NavigationUpdatesOptions.builder()
             .setNumNextStepsToPreview(numNextStepsToPreview)
             .setGeneratedStepImagesType(GeneratedStepImagesType.BITMAP)
             .setDisplayMetrics(getResources().getDisplayMetrics())
             .build();
boolean isRegistered =
          navigator.registerServiceForNavUpdates(
              getPackageName(),
              NavInfoReceivingService.class.getName(),
              options);

After you enable icon generation, the TurnbyTurn StepInfo object populates the maneuverBitmap and lanesBitmap fields with the icons.

What's next

• For Android Auto apps:
  • Draw the map and enable navigation.